Author Topic: SOLD Used Woodmizer LT40 Super 40 for sale SOLD (Read 3849 times)

Chris Burchfield · « **on:** June 17, 2017, 08:24:41 AM »

2005 Mill is a Super LT40 HDD with Trailer package, New Tires w/spare, Remote Command Control on end (no walking back and forth with the saw head.) Autoclutch, Hydraulic loader, clamp, claw turner, roller toe boards. Debarker, New Lubemizer tubing & New pump. Board drag back. New Lubemizer tank & New Fuel tank. Covers for the Accuset 3.05 & Engine. Twice the speed of the standard hydraulic mill. 197.7 actual hours on the mill. I've not advertised anywhere. I had to replace the Lubemizer tubing and replace the Lubemizer pump. I also had to get the Board Drag back accessory working and change the engine oil, oil filter & air filter. I have a Woodmizer Flyer advertising an LT Super W/Command Control with a 35 HP gas engine for $37,295 before accessories. I think $30,400 "Reduced" $28,000 is a fair price based on the added accessories and actual usage. I paid near $40,000. I have the original Woodmizer Certificate for the mill and all the Manuals that came with it. Home Phone w/ answering machine (901 754-8251) Cell phone (901) 647-9302. Some of the best people in the world reside here on the Forestry Forum. It is where I picked up a lot of my knowledge. That's why I chose to list it here. Chris Burchfield, Memphis Tennessee.
I spoke with Archie @ Woodmizer. He looked up my mill and said it is worth up to $33,400.

I UNDERSTAND AND AGREE TO THE TERMS OF POSTING AN AD ON THE FORESTRY FORUM.

Chris Burchfield · « **Reply #1 on:** June 28, 2017, 07:36:55 PM »

Okay Guys & Gales, eleven days, no runs, no hits, no errors, no comment. I thought it was a fair price, I need to move the mill. With my psoriasis it just doesn't work. The ointment washes off from sweat after a couple of hours. It only gets worse but won't go into it further. When I ordered the mill I knew I would only get older. That's why I ordered the Super & hydraulics. I had four jobs that paid good with just me. This mill will work four or five people hard all day on 5 -7 gallons of diesel. Can someone make a reasonable offer? Regardless, 5% goes to the Forestry Forum on what ever we agree upon. Thank you for your consideration. Chris Burchfield, Memphis TN.

fishpharmer · « **Reply #2 on:** June 28, 2017, 09:58:23 PM »

Chris, great looking mill, wish I could fit it in my budget now. I want a remote. I have no complaints about mine except its not remote.

prittgers · « **Reply #3 on:** June 29, 2017, 01:18:48 AM »

I have a lot of time operating remote WM machines. You have something really nice here. Hope you make a good deal with someone who recognizes the value of a machine like this.

As of December 31, all diesel powered mills built commercially will require Tier 3 permits. Take the cost of an option like this and DOUBLE the $4000 cost - to $8000. It's a 'pass through' cost to the consumer since it is required by the EPA of the manufacturers.

Most of us are hoping that the President will rescind the burden of regulations that drive the cost of American equipment almost out of reach.

Obviously, this makes your mill have higher value!

Good luck!

Parker in Alaska

Chris Burchfield · « **Reply #4 on:** July 05, 2017, 02:42:41 PM »

REDUCED! $28,000.

MbfVA · « **Reply #5 on:** July 08, 2017, 04:04:25 PM »

Wish I could afford to go along with my Peterson swing blade (just bought used from someone like you who became medically unable to continue milling), best of both worlds.

I'll keep my ears open in case anyone says something to me. I'm trying to help someone find a swing blade mill now. If you weren't over 11 hours from me, I'll take a look at it anyway. If my wife would let me.

I'll add one suggestion regarding buying/selling and taking offers: keep your "attitude guard" down about offers. It's a bargaining process, and no offer is a bad one, since it can lead to a better one or sometimes when you rethink it, it may just become acceptable.

Chris Burchfield · « **Reply #6 on:** July 18, 2017, 06:18:01 PM »

Listed just over a month now @ more than 28% off what I paid for the mill. 2 hours and 3/10's shy of five 40 hour weeks worth of use. Is there any interest out there for purchase of this mill?

TKehl · « **Reply #7 on:** July 18, 2017, 10:32:41 PM »

Interest yes. Funds....

Keep your spirits up. Don't need a lot of interest, just one person with $.

cowdoc87 · « **Reply #8 on:** July 27, 2017, 12:14:40 AM »

Chris, I will try to give you a ring tomorrow. Youve got a nice mill. A buyer will come along . Might be me.

Chris Burchfield · « **Reply #9 on:** July 27, 2017, 07:29:09 AM »

I have a gentleman I'm meeting with Friday that is going to buy my mill. Thanks to all who have looked and or shared information on this link.

Chris Burchfield · « **Reply #10 on:** July 28, 2017, 10:29:58 PM »

It's a done deal, he drove out of the North end of Ohio, me from Memphis. We met about half way in Lexington, Ky. Raining it's dang but off. On the way up heavy rain, someone hydroplaned into the median. After the deal was done w/ equipment and cashier's check swapped we both made it back home safe in one piece. Just before entering Shelby County, saw a terrible wreck on the East bound side of I-40 w/ traffic backed up for miles. Prayers for those involved. Thanks again FF family. Chris.

Magicman · « **Reply #11 on:** July 29, 2017, 09:14:45 AM »

I am sorry that your sawing did not pan out but congrats on the sale Chris. Just curious, how did the buyer find you?

Chris Burchfield · « **Reply #12 on:** July 29, 2017, 09:41:07 AM »

He found it here on the FF. As stated in the first post of this thread "I have not advertised anywhere else." Reason: "Some of the best people in the world reside here on the Forestry Forum. It is where I picked up a lot of my knowledge. That's why I chose to list it here." I encouraged him to spend more time here at the FF because of the diversity & knowledge available.

Magicman · « **Reply #13 on:** July 29, 2017, 10:00:32 AM »

I was hoping that it would stay in the FF Family. Congrats to both of you.

Stoneyacrefarm · « **Reply #14 on:** July 29, 2017, 10:54:30 PM »

Chris.
Congratulations on the sale of you mill.
I've been watching it for some time.
Just not quite able to pull the trigger yet.
Good luck

Chris Burchfield · « **Reply #15 on:** July 31, 2017, 03:45:22 PM »

I was the same before I purchased this one Stoneyacrefarm. Woodmizer first used the Italian diesel Lamberdini, I did not know of the name. Then they offered the Kubota which I thought was a really good match. Then came the Caterpillar, and I pulled the trigger. I wanted the diesel for longevity.

Forestry Forum
Sponsored by: