iDRY Vacuum Kilns

Sponsors:

Hammer N4400 tracking issue

Started by Woodslabs, December 21, 2017, 10:34:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Woodslabs

December 21, 2017, 10:34:29 PM
I have a brand ner N4400.  It was working fine with a wider blade.  I swapped to a 5 mm blade for some round cuts.  it worked fine.  All of a sudden now i cant keep the blade on.  I track the blade to the middle of the upper wheel (on the lower wheel its all the way to the back.)  I spin it by hand and it stays in the middle.  As soon as i turn it on the blade rides forward and comes off.  No idea whats going on.  Also i'm not sure if this is normal but the upper wheel can be moved in and out and side to side when the blade is not tensioned.

Anyone have any idea what could be causing this?
check out www.woodslabs.ca

Kbeitz

#1
December 21, 2017, 11:04:16 PM
Sounds like you lost a bearing...
Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work

Woodslabs

#2
December 21, 2017, 11:49:40 PM
I fixed it.  The tracking on the lower wheel was way off.  Centered it and work fine now.
check out www.woodslabs.ca
Print
Go Up Pages1
User actions

Thank You Sponsors!