Stihl 032 high/low settings

[matt]

Hi, can anyone tell me the number of screws out to set the high and low adjustments on the 032 Farm Boss, circa 1988
Much appreciated. Matt

[Hawkin50]

Hi mat.Try turning the h and low screws in gently till they seat.thumb and finger tight.Try 1@1/4 turns out to start.Low mix screw like 1 turn.high speed likely 1 to 1.1/4.Then adjust the idle speed just under chain engagement.Best of luck.Hawkin50.

[Rocky_J]

Bookmark this page, it is yer handy-dandy reference for adjusting carbs.  
http://www.madsens1.com/sawtune.htm
 8)

[dozerdan]

Hi
 Madsen's does have an excellent site for adjusting your carb.
 Stihl produced the 1113 series of saws from 1970-1985 only.
 First was the 030 in that line up built from
1970-1971
Next was the 031 built from
1971-1982
The 032 was built from
1978-1985
If you purchased the saw in 1988, it must have been on the dealers shelf for a few years.
Later
Dan

[matt]

Thanks for replys, much appreciated. Actually bought saw used in 88 and it has been going strong ever since.
Thank again. Matt