iDRY Vacuum Kilns

Sponsors:

J'Red 630 Ignition Module Clearance

Started by hersnsh#590, February 20, 2017, 08:26:09 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

hersnsh#590

February 20, 2017, 08:26:09 PM
I'm on the verge of changing out a 630 ignition module (2 piece).  The current clearance between the module and the flywheel magnet is a loose 0.0015, which seems high.  Does anybody know the recommended clearance, or where I might find that information?

Thanks
Dale
TK 1600, small sugaring operation, a bench full of J'reds, a tired ford 1710, new to us JD 5065e, 2 Honda 4 whlrs, a Can-Am 580 on tracks, and a very understanding wife.

dougand3

#1
February 20, 2017, 08:33:56 PM
Husky: 372xt, 272xp, 61, 55 (x3)...Poulan: 315, 4218 (x3), 2375, 2150, 2055, 2000 (x3)...Stihl 011AVT...Homelite XL...Saws come in broken, get fixed or parted, find new homes

hersnsh#590

#2
February 22, 2017, 08:42:14 PM
Doug:  Thank you.  That looks like a good site for saw specs.

Dale
TK 1600, small sugaring operation, a bench full of J'reds, a tired ford 1710, new to us JD 5065e, 2 Honda 4 whlrs, a Can-Am 580 on tracks, and a very understanding wife.

Gearbox

#3
February 23, 2017, 05:29:10 PM
I just use a business card . Close nuff
A bunch of chainsaws a BT6870 processer , TC 5 International track skidder and not near enough time
Print
Go Up Pages1
User actions

Thank You Sponsors!