The Forestry Forum
Other topics for members => General Woodworking => Topic started by: DMcCoy on December 30, 2017, 07:15:35 PM
Anybody use these?
https://www.kregtool.com/store/c28/project-clamps-and-face-clamps/p387/3-wood-project-clamp/
They automatically adjust to differing thickness's of material. Looked super impressive in the store, clamping between 3/4" and @3" without adjustment.
Edit: Someone having fun editing my grammar?
I be done uzing some of doze. I da likes um for puttin in stiles. Banjomonie
I use their bench clamps with crank down handles vs auto adjust and they work great. Kreg makes some really good stuff.
I have their pocket hole jig set and I love it.
I have a set of the normal self adjusting ones made by them.
Been using them since they came out. LOVE THEM. I used them quite a bit when putting up new fencing boards. I also like their washer head screws. Get plenty of pull down with the bigger heads.
Bruce
Yep, got a pair of them and love them. Works great with my Kreg Jig and for other stuff as well.
I bought a pair of the 6 inch ones last week at Lowes and they have a very inconsistent clamping force. Sometimes they would clamp right and other times it would take 2 hands to squeeze them deforming the clamp with the same adjustment. I contacted Kreg to see if it needed to be lubed or returned and they are sending a replacement right out as it seems I got a defective one . Great customer service that saved me a 40 mile round trip back to Lowes. I definitely will pick up a couple more if the replacement works right. :)