iDRY Vacuum Kilns

Sponsors:

skid steer

Started by coxy, September 18, 2014, 07:12:26 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

coxy

does any one know how to check the oil in the finel drives they are leaking a little on the wheels its a gehl 4625  I cant seem to find any thing that looks like a plug in side or out   thanks

Bert

between the tires on each side there should be a plug. remove the plug and oil should be level with the hole. should be right below the chain case access cover. If there is no plug, the oil level should be one inch below the chain case access opening. I believe some had the plug and some did not.
Saw you tomorrow!

Upnorth

Coxy, can't speak for anything but a Bobcat, but my machines final drive plug is a 3/4 plug front centre. Have to lift your boom, look below the front door dead centre, about 10" above the bottom of the skid plate. I check mine with the short end of an Allen wrench.
TJ 205
TJ 240E
TJ 350A x 3
TJ 230D x 4

Thank You Sponsors!