iDRY Vacuum Kilns

Sponsors:

EBAC LD3000 KILN

Started by rs1626, June 15, 2004, 09:26:05 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rs1626

ANYBODY USING EBAC LD3000 KILN ?  GOOD   OR BAD POINTS  I  AM TRYING TO DECIDE BETWEEN IT AND NYLE 200

Frank_Pender

I wish I could tell you about my 3000, but I have not set up in the new kiln building I pan to build in the very near future.  I have had the unit for about 4 years.  I am a bit behind in getting the  new kiln built. :'(
Frank Pender

shopteacher

QuoteI am a bit behind  
Frank,
That's what I tell the secretary when she asks about my lesson plans. :D
Proud owner of a LT40HDSE25, Corley Circle mill, JD 450C, JD 8875, MF 1240E
Tilt Bed Truck  and well equipted wood shop.

rs1626

sound like you need 24 more hours in a day

Frank_Pender

--Shopteacher:  after my first year of teaching I neveer turned in another set of lesson plans to the administration office.  I told them that if they wanted to see my plans they had to come to my room and look in my guidebook.  :P  I had a book for each subject; English, Social Studies and Literature all set for the entire year.

  rs,  I could not only use a few more hours in a day but more days in a week and still not get it all accomplished.
Frank Pender

shopteacher

One year I turned in the same lesson plan  for 17 weeks. They caught it at the end of the year and were pretty POed. Shows you how often they look at the things during the year.
Proud owner of a LT40HDSE25, Corley Circle mill, JD 450C, JD 8875, MF 1240E
Tilt Bed Truck  and well equipted wood shop.

Thank You Sponsors!