iDRY Vacuum Kilns

Sponsors:

Good Youtube Videos

Started by 4x4American, February 15, 2017, 11:04:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

4x4American

Well, all the time I run into good vidjas on youtube, and I think it'd be cool to have a spot to put them, so that we can share videos we thought were good, and on a day when it's -40°F outside and we're inside feeding the woodstove, we can waste alot of time on the interweb...or whatever floats your goat.




I'll start, this guy has some very interesting videos:


https://www.youtube.com/watch?v=Y_lHOpqwDI4
Boy, back in my day..

Kbeitz

For years I have been going to these two url's. Someone tries to
post the best videos of the week off the web.

http://www.wimp.com/?old=1/

http://www.flixxy.com/most-recent-videos.htm?r=top
Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work

Kbeitz

Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work

4x4American

Boy, back in my day..

4x4American

Here's a proper jacking:


https://youtu.be/PJt4md2J7KE


and here is one of my favorite falling videos:


https://youtu.be/V-SwpDKkHko




And here is my favorite falling video:
https://youtu.be/2x7MXn5zuEw



Boy, back in my day..

Kbeitz

That was some good ones for sure...

Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work

4x4American

Boy, back in my day..

Ox

That Boltr guy sound exactly like a guy named Ave on the Utube.  Love Ave's vidyas.
Ol' Bud Merz would have hated me if I lived near him cause I woulda never left the place!
K.I.S.S. - Keep It Simple Stupid
Use it up, wear it out, make it do or do without
1989 GMC 3500 4x4 diesel dump and plow truck, 1964 Oliver 1600 Industrial with Parsons loader and backhoe, 1986 Zetor 5211, Cat's Claw sharpener, single tooth setter, homemade Linn Lumber 1900 style mill, old tools

4x4American


Me too! I'm watching one right now:

https://www.youtube.com/watch?v=QhpOg186fks

Maybe he sounds like AvE because he is lol

I think that the powermodz guy forum member Ishobie (sp?) sounds like AvE.  He put a vidja up on his thread in the sawmill forum new guy with some land skidder sawmill... and he was talking over it I thought he was AvE
Boy, back in my day..

4x4American

I love the stuff AvE says..."give her a proper what for with a beefy thumb detector"  lol lol lol 
Boy, back in my day..

paul case

I guess I may live a sheltered life and all that but some of my favorite youtube vids are along these lines.

https://www.youtube.com/watch?v=MUuWWqRBpwc





PC
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

Magicman

Ouch, that is wild!  Where is Tammy Brokaw when we need her??   ???
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

barbender

PC, that's awesome! I could see myself getting into figure 8 school bus racing :D
Too many irons in the fire

Kbeitz

Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work

Dan_Shade

Woodmizer LT40HDG25 / Stihl 066 alaskan
lots of dull bands and chains

There's a fine line between turning firewood into beautiful things and beautiful things into firewood.

paul case

I very seldom read the comments on a video on youtube, but I caught 1 about the figure 8 racing.

''I think it should be against the rules to slow down at the intersection.''

I bet there isnt any texting and driving going on there!
PC
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

sandhills

PC we USED to have bus races at our county fair, not figure 8 but on our little 3/8 mile dirt track, I helped build one for my buddy.  I was scared, and we used to race stock cars there every week.  My farm fuel guy had one and got rolled, if he doesn't thank God every morning he wakes up that he was tied down to the cab and not the chassis he should because when they come apart they REALLY come apart.  We honestly thought he got torn in two, after two fairs (I think) they quit, my buddy sold it to some guy that turned it into a camper and everyone else turned them into RV's for hauling around wedding parties and such, a much safer use for them! It was fun building it but we got it there and there happened to be a guy in the pits with the tools and know how to get rid of the governor and turn the pump up on ours, that's when it got scary.

Kbeitz

Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work

Ox

What a neat way to make a hive!  Lots of work... work like this never used to bother me a bit but nowadays and the worse I get......nah.
K.I.S.S. - Keep It Simple Stupid
Use it up, wear it out, make it do or do without
1989 GMC 3500 4x4 diesel dump and plow truck, 1964 Oliver 1600 Industrial with Parsons loader and backhoe, 1986 Zetor 5211, Cat's Claw sharpener, single tooth setter, homemade Linn Lumber 1900 style mill, old tools

4x4American

Boy, back in my day..

coxy

they got nice equipment  wonder where all there safety gear was  ;D

4x4American

Quote from: coxy on July 23, 2017, 08:40:19 PM
they got nice equipment  wonder where all there safety gear was  ;D


I don't think the Amish even know what osha is lol


These guys cheat though they have a fb page and use social media and smartphones ans all that lol I think the only thing they do amish is wear homemade clothes but other than that looks like just angood tax write off yup I'm gonna become Amish I can't compete with their lumber prices so if ya can't beat em join em lol
Boy, back in my day..

JB Griffin

2000 LT40hyd remote 33hp Kubota with 6gpm hyd unit, 150 Prentice, WM bms250, Suffolk dual tooth setter

Over 3.5million bdft sawn with a Baker Dominator.

4x4American

Yutt ok I've seen this and dreamed about it a couple two three times lol.  Clay Hedrick posted this he's a sales rep/other stuff guy at Baker.  Adam or Jeff told me that this vidjayo is taken place at Baker's production facility.  See Baker tests their equipment and uses it to make money also.  Gotta love it!
Boy, back in my day..

4x4American

Boy, back in my day..

Thank You Sponsors!