iDRY Vacuum Kilns

Sponsors:

Hot rod

Started by Peter Drouin, June 08, 2019, 12:39:12 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Peter Drouin

I found a 1932 all steel body Chevy the ford was not as good. And I'm Chevy guy. ;) This is a pix of a pix.


 
Going to pick it up after bike week.
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

thecfarm

Good for you.
Kinda odd reading the posts. Hot Rod,right below it was Hot Box. ;D
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Bruno of NH

Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Peter Drouin

I talked to Jim Lowrey to day. Going to have him look at the Hot Rod. And maybe have him fine tune it. He's just up the road a mile or two from me.
Look what he does. :o

HOT RODS BY JIM LOWREY'S AUTO RESTORATION
If I have enuff$$$$. :D :D :D 8)
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

moodnacreek

Good for you. I want one of those but I have not finished my ww 2 jeep. The only problem with the bow tie motor is that everybody has one.

sawguy21

Sweet! I love hot rods but never had the resources to inndulge in one.
old age and treachery will always overcome youth and enthusiasm

Jeff

Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Peter Drouin

You know Jeff with lumber prices going down and spending all the $$$$ I did might not be a good idea.  :D
This is the first time in my life I bought something, In a way, foolish.
Stayed up last night thinking a hotrod or an IDRY kiln.
Idry is more work for me. 
I have a hard time not to work. But when I drove it today and punch the 3 duses [3 two barrel carbs] and it put me into the seat. I was smiling so much I almost could not see the road. 

I ask the guy where are the window cranks? he pushed a button on the door and the window came up.
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Jack Lilley

Quote from: Peter Drouin on June 08, 2019, 08:28:02 PM
I talked to Jim Lowrey to day. Going to have him look at the Hot Rod. And maybe have him fine tune it. He's just up the road a mile or two from me.
Look what he does. :o

HOT RODS BY JIM LOWREY'S AUTO RESTORATION
If I have enuff $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$. :D :D :D 8)
Used to race a 350 super modified at Lee and Jim was also running one at the time. His work is top notch.

GRANITEstateMP

Lowrey's cars, both street and race are usually top notch, good idea to run it past him Peter.  We got a little car show most Tuesday nights at the only gas station over here in Nottingham - Liars's Paradise.  You should bring it by once you've got some miles on it!
Hakki Pilke 1x37
Kubota M6040
Load Trail 12ft Dump Trailer
2015 GMC 3500HD SRW
2016 Polaris 450HO
2016 Polaris 570
SureTrac 12ft Dump Trailer

Peter Drouin

Quote from: GRANITEstateMP on June 09, 2019, 07:11:02 AMNottingham - Liars's Paradise.  You should bring it by once you've got some miles on it!
I just might do that. But first I have to build a garage to put it in. ::) :D :D
I have a walk-in cellar with a man door. Maybe put in a Hot Rod door. That way it will be worm for the Hot Rod and the Harley in the winter.  ;D
Like buying a cow before you put up a barn. :D :D ;)

Bookwork is done. I'm jumping on the Harley to look at a car lift, Just like a sawmill. There's always something to get.  ;D
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

samandothers

Glad you got it!  Should be fun to get in and go play, besides you gotta keep it running to keep it up!

Bruno of NH

Good for you can't wait to see it 8)
They have a car show every Thursday at the bank parking lot in Newport NH
Steven Tyler from Aerosmith goes when he's in Sunapee at his lake house
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Peter Drouin

All registered. Going to get tomorrow. Will have pix if I can stop driving it around.  8) 8) 8) 8) ;)
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

samandothers


Very exciting!

Be safe and have fun!

Peter Drouin

The first place is to take it to the police station so they will have a look.
So when I go by the station at 50 in a 30 they will know it's me.
:laugh: :laugh: :laugh: :laugh: 8) 8)
We all get along.
smiley_nananana smiley_horserider smiley_biggrin01
There are 4 of us with Hot Rods in town that I know of.
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

thecfarm

Road trip to Chesterville in the plans?  :D
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Peter Drouin

A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

thecfarm

I'll leave the sawmill on.  :D
Must warn you,I live on a dead end dirt road,than a long dirt driveway.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Peter Drouin

Got it home.


 

 

 

 
See the two brake master cylinders, One for the front other for the back.


 

 

 

 

 
Power windos.


 
Main off switch.


 
All racing stuff. Has a Lokar performance trans. 327 ci bored 40 over with flat top pistons,
Tci torque converter A lot of Jegs racing parts in the car. Has a role bar.<


 

 

 

 

 

 
Some pix of pix of the car going together.  Have all the paper work of whats in the car.
I had so much fun with it today I lost the time of the day. If you know what I mean.
I can say when you step on the gas at a stop, Go easy. [ Smoke show] and rubber all over the road. :laugh: :laugh:
Only 1800 lb


 
The Hot Rod will have to live in the greenhouse till I put up a barn for it, Wonder where I can get some lumber,  ;)
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Jeff

Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

sawguy21

 8) It looks to be very well built and detailed. It will attract a lot of attention so behave yourself.
old age and treachery will always overcome youth and enthusiasm

Bruno of NH

That is very nice 8)
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Tom the Sawyer

Nice rod, Peter.  You'll be getting some looks when you take it around town. ;D
07 TK B-20, Custom log arch, 20' trailer w/log loading arch, F350 flatbed dually dump.  Piggy-back forklift.  LS tractor w/FEL, Bobcat S250 w/grapple, Stihl 025C 16", Husky 372XP 24/30" bars, Grizzly 20" planer, Nyle L200M DH kiln.
If you call and my wife says, "He's sawin logs", I ain't snoring.

Southside

Did it come with a Tommy gun and a case of shine?  ;D :D
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

Thank You Sponsors!