iDRY Vacuum Kilns

Sponsors:

New Toy Ford 8N

Started by Raider Bill, January 16, 2014, 03:28:13 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Al_Smith

On that business it seems often times if the starter switch goes bad on the Fergusens the common practice was to use a Ford starter relay .Of course it works but there is no safety built into the system like the shift lever interlock built into the original design .

Those replacement switchs are not that expensive .

thecfarm

Seem like on my '54 Ford if you try to start it in gear the starter button won't go down.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Al_Smith

For that matter regarding safety more than one person has been injured or killed from a hand cranker with a magneto from leaving it in gear .I might also add more than one person has been maimed from backing a John Deere with a hand clutch while standing on the ground .

Planman1954

My 9n (1943 model) will NOT start if it is in gear. Key on, neutral gear, clutch down, brake on, then hit the start button.
Norwood Lumbermate 2000 / Solar Dry Kiln /1943 Ford 9n tractor

Thank You Sponsors!