iDRY Vacuum Kilns

Sponsors:

nice oak

Started by woodmills1, July 17, 2018, 06:13:45 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

woodmills1

I would say I picked up a log last Thursday but, I more like slid the 6400 pound thing onto my trailer.  Pushed it off home and said too heavy must cut but no orders, 18 foot long oak 25 inches at 18 feet.  On the message an order for 1x6x8 horse fence.  I cut that 18 foot oak into two 9 foot logs.  Contest, guess how many 1x6x8 I got out of the two pieces and I send you something. Ifin one of ya guesses right in the first 5 guesses I buy you a peavey in aluminum from our board friend.
James Mills,Lovely wife,collect old tools,vacuuming fool,36 bdft/hr,oak paper cutter,ebonic yooper rapper nauga seller, Blue Ox? its not fast, 2 cat family, LT70,edger, 375 bd ft/hr, we like Bob,free heat,no oil 12 years,big splitter, baked stuffed lobster, still cuttin the logs dere IAM

woodmills1

so you know this is legit I won an early award here, a framed nice picture of trains logs and bears.  Ifin any of ya guess correct in the next 5 guess I send ya  framed print I got from Jeff, I think.
 
James Mills,Lovely wife,collect old tools,vacuuming fool,36 bdft/hr,oak paper cutter,ebonic yooper rapper nauga seller, Blue Ox? its not fast, 2 cat family, LT70,edger, 375 bd ft/hr, we like Bob,free heat,no oil 12 years,big splitter, baked stuffed lobster, still cuttin the logs dere IAM

Pjames


Bruno of NH

Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

POSTON WIDEHEAD

The older I get I wish my body could Re-Gen.

CCCLLC


DelawhereJoe

Is this a trick question ? You said you cut the logs to 9' so you ended up with 1x6x9 making your total 1x6x8 count at zero/0.
WD-40, DUCT TAPE, 024, 026, 362c-m, 041, homelite xl, JD 2510

AlpineCutter


AlpineCutter

My bad, i didnt read the question good enough. I guessed 415 board feet and i should have guessed 106 1x6x8 boards

thecfarm

Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Crossroads

With the right fulcrum and enough leverage, you can move the world!

2017 LT40 wide, BMS250 and BMT250,036 stihl, 2001 Dodge 3500 5.9 Cummins, l8000 Ford dump truck, hr16 Terex excavator, Valley je 2x24 edger, Gehl ctl65 skid steer, JD350c dozer

sprucebunny

MS193, MS192 and an 026  Weeding and Thinning. Gilbert Champion sawmill

caudlefarm

1997 cook ac36 sawmill. 96 lull 644b-37. 1995 international 4700. 1999 873F bobcat. 2 MS880 stihl. 2 064 stihl. MS261 stihl chainsaws

Callaway1702


Rhodemont

Woodmizer LT35HD    JD4720 with Norse350 winch
Stihl 362, 039, Echo CS-2511T,  CS-361P and now a CSA 300 C-O

florida

General contractor and carpenter for 50 years.
Retired now!

mroldstyle


btulloh

HM126

caudlefarm

1997 cook ac36 sawmill. 96 lull 644b-37. 1995 international 4700. 1999 873F bobcat. 2 MS880 stihl. 2 064 stihl. MS261 stihl chainsaws

homesteader shane


AlpineCutter

C'mon woodmills, the suspence is killing me.

Larry

24,282 

Those LT-70's can do amazing things. :o

Did I win? :)
Larry, making useful and beautiful things out of the most environmental friendly material on the planet.

We need to insure our customers understand the importance of our craft.

woodmills1

rhodemont is the closest, I got 100 pieces of 1x6x9 and another 24 pieces of smaller than 6 inch width.  I was also pretty good looking wood and sure made the fence order go quick.
James Mills,Lovely wife,collect old tools,vacuuming fool,36 bdft/hr,oak paper cutter,ebonic yooper rapper nauga seller, Blue Ox? its not fast, 2 cat family, LT70,edger, 375 bd ft/hr, we like Bob,free heat,no oil 12 years,big splitter, baked stuffed lobster, still cuttin the logs dere IAM

DelawhereJoe

So it was a trick question,  about 100 1x6x9 with 0 1x6x8
WD-40, DUCT TAPE, 024, 026, 362c-m, 041, homelite xl, JD 2510

woodmills1

joe the 2 logs were 9 or so but the product is 1x6 oak horse fence 8 foot long.  I don't charge them for any extra length which allows them a little leeway with the post placement.  This fence company is one of my longest running customers so even thought I used logs that were a little longer than 8 they are priced as 8 foot product so, exactly 100.
James Mills,Lovely wife,collect old tools,vacuuming fool,36 bdft/hr,oak paper cutter,ebonic yooper rapper nauga seller, Blue Ox? its not fast, 2 cat family, LT70,edger, 375 bd ft/hr, we like Bob,free heat,no oil 12 years,big splitter, baked stuffed lobster, still cuttin the logs dere IAM

Rhodemont

Woodmizer LT35HD    JD4720 with Norse350 winch
Stihl 362, 039, Echo CS-2511T,  CS-361P and now a CSA 300 C-O

Thank You Sponsors!