iDRY Vacuum Kilns

Sponsors:

Looking for husky 266xp spec's

Started by WoodSmith, October 13, 2005, 12:33:10 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

WoodSmith

October 13, 2005, 12:33:10 AM
I have been unable to find the displacement for the Husky 266xp. Would it have enough ponies for an alaskan mill running a 28" bar. mostly cutting Douglas Fir.

Kevin

#1
October 13, 2005, 07:43:07 AM
66.7cc.
Depends on how much wood you'll be milling.
Anything over 15" is probably going to be a good work out for both you and the saw.

Chris J

#3
October 18, 2005, 06:07:22 PM
Milling with a 28" bar is asking too much of the 266xp; maybe try a saw 90cc or more.
Certified Amateur Chainsaw Tinkerer.  If sucess is built on failure, then one day I'll live on the top of Mt. Everest.

WoodSmith

#4
November 01, 2005, 01:46:01 AM
Here is great website that someone sent to me and it has been invaluable.

http://www.acresinternet.com/cscc.nsf?OpenDatabase
Print
Go Up Pages1
User actions

Thank You Sponsors!