The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: Roland on October 29, 2018, 05:52:34 PM

Title: Yukon men, Stan Zurray CS milling vid
Post by: Roland on October 29, 2018, 05:52:34 PM
I'm not sure how to upload a YouTube vid but Stan Zurray of Yukon men just put out a good short YouTube vid on CS milling with a 40 year old sthil.
It seemed almost effortless for him to rip lumber. The saw was doing 99% of the work pulling itself through the log amazing to watch.
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Hilltop366 on October 29, 2018, 09:37:40 PM
To post a link just copy the address of the video and paste it here.

How to Make Lumber With an Alaskan Chainsaw Mill - Stan Zuray - YouTube (https://www.youtube.com/watch?v=9w04ppZdfZA)

And it shows up like this.
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Downstream on October 29, 2018, 09:51:59 PM
One of the secrets to chainsaw milling is to set-up the log going down hill slightly so that the weight of the saw/mill will help push the bar through the wood.  He has a pretty good angle on that log so gravity is your friend.  I actually did the same thing with my manual band saw mill.  the track is level side to side, but just slightly inclined lengthwise so gravity helps feed the head unit into the log.
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Roland on October 29, 2018, 10:38:54 PM
Quote from: Hilltop366 on October 29, 2018, 09:37:40 PM
To post a link just copy the address of the video and paste it here.

How to Make Lumber With an Alaskan Chainsaw Mill - Stan Zuray - YouTube (https://www.youtube.com/watch?v=9w04ppZdfZA)

And it shows up like this.
Gr8 thx bro
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Hilltop366 on October 30, 2018, 07:45:30 AM
Your welcome, thanks for the vid.
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Weekend_Sawyer on October 30, 2018, 08:51:00 AM
Wow, that log must be at quite an angle for the saw to walk through it like that.
I like that he allows the saw to cool down run for about 30 seconds after the cut.

Jon
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: WV Sawmiller on October 30, 2018, 07:58:46 PM
   I really think it is neat the way he reconstructs the log from the stickered flitches to air dry using the slab as a natural rain cover.
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Roland on October 30, 2018, 09:11:50 PM
Quote from: WV Sawmiller on October 30, 2018, 07:58:46 PM
  I really think it is neat the way he reconstructs the log from the stickered flitches to air dry using the slab as a natural rain cover.
No doubt, that was cool
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Weekend_Sawyer on October 31, 2018, 07:34:13 AM

  "That's a fish tote there, we use it for fish and also as a bath tub"

That's funny!
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: stanzuray on October 31, 2018, 06:51:56 PM
Roland and Hilltop thank you for posting video - nice to get it out there more. Got a notification from the posting and glad to know about the Forestry Forum as most of what I know about logging and chainsaws is from just using them and that often leaves a lot to be desired even at 69 years old. Got a YouTube Channel under my name (Stan Zuray) and it has a lot of bush living stuff on it if anyone interested (minus the TV drama).
We mess with logs and trees often and here's a picture of a fishwheel that is made entirely (almost) out of forest products - river logs for raft, 100 peeled poles for baskets, and chainsaw boards and timbers for towers and chutes. Great site. Stan
(https://forestryforum.com/gallery/albums/userpics/52402/Wheel_from_hill~0.JPG?easyrotate_cache=1541026258)
 
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: ellmoe on October 31, 2018, 09:28:54 PM
Welcome to the forum, Stan. Look forward to seeing your you-tube site.
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Roland on October 31, 2018, 10:56:39 PM
Quote from: stanzuray on October 31, 2018, 06:51:56 PM
Roland and Hilltop thank you for posting video - nice to get it out there more. Got a notification from the posting and glad to know about the Forestry Forum as most of what I know about logging and chainsaws is from just using them and that often leaves a lot to be desired even at 69 years old. Got a YouTube Channel under my name (Stan Zuray) and it has a lot of bush living stuff on it if anyone interested (minus the TV drama).
We mess with logs and trees often and here's a picture of a fishwheel that is made entirely (almost) out of forest products - river logs for raft, 100 peeled poles for baskets, and chainsaw boards and timbers for towers and chutes. Great 
You're welcome Stan and God bless  
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Chop Shop on November 01, 2018, 12:09:42 AM
I enjoy watching your segments on the TV.  I admire your patience.

Welcome.
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Hilltop366 on November 01, 2018, 07:59:07 AM
Your welcome.

Welcome to the Forestry Forum.
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Weekend_Sawyer on November 01, 2018, 08:23:34 AM
I appreciate non drama TV.

Welcome to the forum.
Jon
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Jeff on November 01, 2018, 08:39:12 AM
Welcome to the Forestry Forum Stan!
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Dakota on November 01, 2018, 08:43:58 AM
Welcome to the Forum Stan.  I watched all the interview videos(1-6) on your You-tube channel.  You've had quite an interesting life, to say the least.  I'll be interested in your perspective on things.
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: btulloh on November 01, 2018, 09:03:43 AM
Welcome to the Forestry Forum, Stan.  

I'm curious - what type of internet service you have up there?
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Magicman on November 01, 2018, 09:17:21 AM
Welcome to the Forestry Forum, Stan.  Just curious as to why you settled in Tanana.  Possible because of the confluence of the Yukon and Tanana Rivers? 

Anyway I always enjoy watching your shows.  :)
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: WV Sawmiller on November 01, 2018, 10:14:35 AM
Stan,

    Welcome to the FF. Great to hear from a real celebrity. ;D

    Down here we like to watch the Alaska shows (I personally don't care for the Fake Bush people) while my BIL in Anchorage says he and his friends all watch Swamp people. I haven't asked him yet if he keeps up with Shelby.

    Take care and be careful out there.
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Bruno of NH on November 01, 2018, 12:48:24 PM
Stan welcome to the FF
I like the chainsaw mill
That's some nice spruce
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: SawyerTed on November 01, 2018, 01:02:17 PM
Welcome Stan!  I too enjoy the show and your YouTube videos.  
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Deere80 on November 01, 2018, 02:14:16 PM
Welcome to the Forum Stan!!
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: stanzuray on November 02, 2018, 12:34:40 AM
Replying to 3 recent posts:

Btulloh - Internet is all over Alaska now. Urban areas have cable and the rural villages have large scale satellite or the newer microwave. Real bush areas can use a small dish HughesNet or similar system which I use all summer at my fish camp. Know a number of people that have no grid power, water, sewer, telephone but got $60/month internet. It's often real slow and limited (YouTube will not stream) but it's much wanted communication. More and more young people don't watch or own TV, they watch YouTube.

Magicman - I came to Tanana because it was the closest village to an bush area 40 miles north of it where I got dropped off by a bush plane in 1973 (lived there 11 years). It was Open to Entry Homestead Federal land but closed shortly after I landed. I got 5 acres there and still go out that way each winter trapping/hunting.

WV Sawmiller - I really enjoyed working on the TV show and with the great cameramen and people that did the film work. It was a small production company in NY and they all were like friends and took care of us I felt. Much different than the normal from what I've learned. The cameramen that went out in the bush with us were world class outdoorsmen and hardly got in our way and often helped break trail etc, The guy that was with me the first couple years had climbed Everest twice.
Shows are all different - the realer ones often get filmed real and not any script but once that footage gets to the big networks and they do their drama editing we are often portrayed in interesting ways. I have learned that is the price of getting in front of a national audience and from the beginning I looked at it as a way to educate people nationally on ethical uses of fur animals (trapping) and natural resources. I think we changed some minds positively. Some shows are 100% scripted and even don't live where they are filmed or are filmed in a different place.
It was a good part time job and hardly affected my lifestyle. Enjoyed learning about the whole industry - many of the cameramen had worked with big name sports and celebrity figures (Trump Apprentice) etc. and very interesting hearing their stories. Stan
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: StimW on November 04, 2018, 12:18:59 AM
Great to see you on the forum Stan, I am a fan of the show also.
What time of the year was the video? You seemed to have warm clothes on.
Is the river frozen yet?
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: stanzuray on November 04, 2018, 02:37:02 AM
Video was made last spring before the fish were migrating in good numbers. Just milling some lumber for some shacks we were building for housing at our fish camp. River was clear of ice and I was boating to the camp which is 40 miles upriver from the village where the family spends the winter. I'm at camp for 4 months steady each year.
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Chuck White on November 04, 2018, 07:09:05 AM
Welcome to the Forestry Forum, Stan!

Glad to have you here, and enjoy you on the show!
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: Lko67 on November 04, 2018, 08:34:24 AM
Welcome aboard Stan glad to have you.  Have watched the show and enjoy it.
Title: Re: Yukon men, Stan Zurray CS milling vid
Post by: StimW on January 07, 2019, 10:33:35 PM
Stan has a lot more video's on youtube about his life in Alaska if anyone is interested.
I have been watching some of them and they cover more than you see on the TV show.