iDRY Vacuum Kilns

Sponsors:

carb jets

Started by coxy, December 07, 2015, 08:54:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

coxy

what should they be set at on a 2166-2172

joe_indi

Quote from: coxy on December 07, 2015, 08:54:29 PM
what should they be set at on a 2166-2172
I assume it is a Jonsered you are asking about.
It it the H and L screw settings you want info on?
Joe

coxy

yes what should they be set at

dougand3

A general rule is the starting position = 1.5 turns out/CCW on L, 1.25 turns out/CCW on H. From lightly seated. After running and hot - then tune for optimum.
Husky: 372xt, 272xp, 61, 55 (x3)...Poulan: 315, 4218 (x3), 2375, 2150, 2055, 2000 (x3)...Stihl 011AVT...Homelite XL...Saws come in broken, get fixed or parted, find new homes

Thank You Sponsors!