iDRY Vacuum Kilns

Sponsors:

Belsaw build

Started by glendaler, May 30, 2018, 03:24:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 6 7
User actions

jimparamedic

#150
June 27, 2019, 12:29:14 AM
Bump

glendaler

#151
June 29, 2019, 05:02:12 PM
Things are slow here. Trying to knock some overdue tasks off the list. Hope to do some sawing this month. Weather has been up and down so my mill building is near the top of the list to get under cover.
Belsaw A10 circle mill,

jimparamedic

#152
July 01, 2019, 11:13:11 AM
Been way to hot here or raining ugh.

JandDenterprise

#153
March 02, 2022, 06:04:43 PM
Quote from: glendaler on May 08, 2019, 06:32:53 PM
So far that's just the initial lead I set up when I installed the saw, will have to check again. Splitter and carriage scale are next.



 



 




This is similar to my build. Making a pto circular sawmill.  Any tips on the carriage? The levers and measurements are where I am stuck 
Ty in advance!
J
Print
Go Up Pages 1 ... 6 7
User actions

Thank You Sponsors!