iDRY Vacuum Kilns

Sponsors:

Husqvarna 394xp photos, please

Started by dooly, January 12, 2011, 07:50:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

dooly

January 12, 2011, 07:50:35 PM
Can anyone provide a photo (or a link to a photo) that shows where the ground wire is connected on a Husqvarna 394xp? Pretty sure one end is connected to the stop switch, but I'll be darned if I can see where the other end connects.

Dave Shepard

#1
January 12, 2011, 07:54:32 PM
I'll search my photos. Back in five.
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

Dave Shepard

#2
January 12, 2011, 08:00:24 PM
I don't have any photos of that wire. I'd have to pull the starter off of mine and take a look. are you talking about the wire that comes off of the kill switch? I've got a case with a coil on it, but I don't know if there are any wires coming off of it.
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

dooly

#3
January 12, 2011, 08:27:05 PM
It's the wire highlighted in the attached image from the parts list. It's about 3" or 4" long. It, along with a screw, are the only parts left from my 394xp rebuild.

Like an idiot, I didn't take photos as I disassembled the chainsaw and now I can't remember where it goes.


Print
Go Up Pages1
User actions

Thank You Sponsors!