iDRY Vacuum Kilns

Sponsors:

Fun now

Started by Peter Drouin, March 08, 2017, 06:43:31 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Peter Drouin

Don't let the chipper rpms go down too much or you get this.


  

  

 
8) ::) ::)
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

POSTON WIDEHEAD

Dirt Dobbers?  :D :D :D
The older I get I wish my body could Re-Gen.

Ox

Good thing ya weren't fillin' an 80 foot silo - you'd have a bit more pipe to clear than that!  Not that this has ever happened to me....  ::) :D
K.I.S.S. - Keep It Simple Stupid
Use it up, wear it out, make it do or do without
1989 GMC 3500 4x4 diesel dump and plow truck, 1964 Oliver 1600 Industrial with Parsons loader and backhoe, 1986 Zetor 5211, Cat's Claw sharpener, single tooth setter, homemade Linn Lumber 1900 style mill, old tools

LAZERDAN

Been there done that.  I hate that when that happens     Lazerdan

Gearbox

It's why I don't like sawdust blowers on sawmills 1 chunk of bark and you get that . How long to clean that out ?
A bunch of chainsaws a BT6870 processer , TC 5 International track skidder and not near enough time

Darrel

Next time you want to do that, get a pellet mill 8) :D
1992 LT40HD

If I don't pick myself up by my own bootstraps, nobody else will.

Peter Drouin

Quote from: Gearbox on March 09, 2017, 09:17:00 AM
How long to clean that out ?





An hour, But I did put in new blades too. It doesn't look like much of a chipper, but, It works well for me.
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

4x4American

Boy, back in my day..

Peter Drouin

It was fun today 4x4, I rescue some old Iron,  ;D

Brought John with me to load the trailer and bring it all home.



  

  

  

  

  

  

  

 
Back in the day cast was fixed with nickel.
One runs, one seized, will see,  ;D

Take the running one, Put steel legs on it, bolted to a concrete floor to run my single Mill


  

  
Put a shive on the PTO.



Had to bring this home too.
If you look at it all it needs is W oak boards everything turns


  

  

  

 
And some extras.


  

 
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

paul case

I like those farmalls! Good deal and lots of fun to see them pics. That last implement is the only one a dealer wont stand behind.

PC
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

4x4American

You hit the jackpot Peter holy cow!  You gonna restore that buzzsaw? 


Still fix cast with nickel rod.  Preheat, weld, post heat iirc.
Boy, back in my day..

Peter Drouin

No on the buzzsaw, but it does turn freely.
Ann was looking at me driving in with [ the stuff ]. Shaking her head and smiling.  ::) :D
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

thecfarm

You better get sawing. The yard is getting full of iron.  ;D
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Bruno of NH

Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Ox

That's some good stuff right there, bud.  Well done!
K.I.S.S. - Keep It Simple Stupid
Use it up, wear it out, make it do or do without
1989 GMC 3500 4x4 diesel dump and plow truck, 1964 Oliver 1600 Industrial with Parsons loader and backhoe, 1986 Zetor 5211, Cat's Claw sharpener, single tooth setter, homemade Linn Lumber 1900 style mill, old tools

Darrel

Yes, yes, very cool stuff!  Now it has found a good home where it will be more than just another rust collector.
1992 LT40HD

If I don't pick myself up by my own bootstraps, nobody else will.

Papa1stuff

Quote from: paul case on March 10, 2017, 09:28:46 PM
I like those farmalls! Good deal and lots of fun to see them pics. That last implement is the only one a dealer wont stand behind.

PC
1987 PB Grader with forks added to bucket
2--2008 455 Rancher Husky
WM CBN Sharpener & Setter

plowboyswr

Looks like '50's models. You sure you want to mix in the red paint?  :D ;)
Just an ole farm boy takin one day at a time.
Steve

ReinkeFandS

Very cool, ive been looking for a manure spreader like that for a while for project (as if I need any more to not get accomplished)
Cooks MP HD3238
Stihl MS 461, MS 261, Homelite SXL
Burnrite 228 OWB
2014 Kubota M6060
1942 Ford 2N

derhntr

I can see a new saw dust spreader in the works
2006 Woodmizer LT40HDG28 with command control (I hate walking in sawdust)
US Army National Guard (RET) SFC

Ox

Funny - I saw a self unloading firewood wagon.  :laugh:
K.I.S.S. - Keep It Simple Stupid
Use it up, wear it out, make it do or do without
1989 GMC 3500 4x4 diesel dump and plow truck, 1964 Oliver 1600 Industrial with Parsons loader and backhoe, 1986 Zetor 5211, Cat's Claw sharpener, single tooth setter, homemade Linn Lumber 1900 style mill, old tools

Darrel

My problem with sawdust isn't spreading it, it's keeping it all together. So I think I'd go for the self unloading firewood wagon. I've never had a firewood wagon unload itself.  I kinda like the idea!
8) 8) 8) 8) 8)
1992 LT40HD

If I don't pick myself up by my own bootstraps, nobody else will.

newoodguy78

I can't tell by the serial tag but those farmalls are C's aren't they?

SlowJoeCrow

That first tractor is a special model, for driving backwards!!

Peter Drouin

A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Thank You Sponsors!