iDRY Vacuum Kilns

Sponsors:

Lt10 drive belt tension setting

Started by SeanG, May 01, 2019, 10:28:58 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

SeanG

Hello everyone I was looking for the drive belt setting for my woodmizer lt10 I changed the motor from a 7hp Kohler to a 13hp predator motor and was wondering if that would affect what the setting may be for it, if not then I would be looking for what the setting is. 
Thanks for your time guys and gals
Sean

Chuck White

Welcome to the Forestry Forum, SeanG!
~Chuck~  Cooks Cat Claw sharpener and single tooth setter.  2018 Chevy Silverado and 2021 Subaru Ascent.
With basic mechanical skills and the ability to read you can maintain a Woodmizer  LT40!

SeanG


Chuck White

Sean, might want to go to the front page and scroll all the way to the bottom and talk to the Wood-Mizer folks!
~Chuck~  Cooks Cat Claw sharpener and single tooth setter.  2018 Chevy Silverado and 2021 Subaru Ascent.
With basic mechanical skills and the ability to read you can maintain a Woodmizer  LT40!

bigtim

Hello Sean,the manual says 19/64 with 6 lbs pull for a new belt 4 lbs for a used belt.Hope this helps,mine is a 2010.

SeanG


Thank You Sponsors!