iDRY Vacuum Kilns

Sponsors:

Where have you stuck yours?

Started by POSTON WIDEHEAD, February 18, 2018, 06:54:05 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

POSTON WIDEHEAD

Stuck my new Decals on my mill and truck today.
I liiiiiiike it!  :)



  

 
The older I get I wish my body could Re-Gen.

Southside

Looks great!!!  Is your mill really that red color or is it just the photos?
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

POSTON WIDEHEAD

Quote from: Southside logger on February 18, 2018, 07:44:48 PM
Looks great!!!  Is your mill really that red color or is it just the photos?


Nope......thats the color. Its orange just like in the picture.
The older I get I wish my body could Re-Gen.

Southside

Ok - must be my screen then, of course I am partially color blind in the red hues.  Found that out years back when I "fixed" a wall for a girl I was dating at the time - to me the paint matched perfectly - but she was able to point to every spot, swirl, line, etc that I fixed. Oh well, looked great from my place!! 
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

Resonator

Painted colors appear in different hues when viewed in sunlight, or indoor light, (or shadow in this case), etc.
Under bark there's boards and beams, somewhere in between.
Cuttin' while its green, through a steady sawdust stream.
I'm chasing the sawdust dream.

Proud owner of a Wood-Mizer 2017 LT28G19

Resonator

Where'd you get 'dem stickies Mr. Goat? ???
Under bark there's boards and beams, somewhere in between.
Cuttin' while its green, through a steady sawdust stream.
I'm chasing the sawdust dream.

Proud owner of a Wood-Mizer 2017 LT28G19

POSTON WIDEHEAD

Quote from: Resonator on February 18, 2018, 08:13:38 PM
Painted colors appear in different hues when viewed in sunlight, or indoor light, (or shadow in this case), etc.




All my colors are HAND HUED.  ;D
The older I get I wish my body could Re-Gen.

Magicman

Lotta good dem magnetic trays are doing you.  I see that you are missing a bolt in dat lower left corner.   :-X
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

POSTON WIDEHEAD

Quote from: Magicman on February 18, 2018, 08:52:23 PM
Lotta good dem magnetic trays are doing you.  I see that you are missing a bolt in dat lower left corner.   :-X

Thats what I thought at first but its just a hole.....nothing behind it. just a hole.
I guess its a add on.  ;D
The older I get I wish my body could Re-Gen.

Magicman

OK, mind also has that hole but there is a bolt screwed through it.   ???
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

POSTON WIDEHEAD

Quote from: Resonator on February 18, 2018, 08:16:29 PM
Where'd you get 'dem stickies Mr. Goat? ???

Came from a company in Michigan. ;)



The older I get I wish my body could Re-Gen.

POSTON WIDEHEAD

Quote from: Magicman on February 18, 2018, 09:23:45 PM
OK, mind also has that hole but there is a bolt screwed through it.   ???

And what may I ask is that bolt holding?  say_what
The older I get I wish my body could Re-Gen.

Magicman

It's holding dat corner of the cover to the sawmill.   :P
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

POSTON WIDEHEAD

Quote from: Magicman on February 18, 2018, 09:29:50 PM
It's holding dat corner of the cover to the sawmill.   :P

My shield has 3 on top and 2 on the very bottom you can't see in the pic. I guess
my hole is a vent.  ;D
The older I get I wish my body could Re-Gen.

POSTON WIDEHEAD

Quote from: POSTON WIDEHEAD on February 18, 2018, 09:33:36 PM
Quote from: Magicman on February 18, 2018, 09:29:50 PM
It's holding dat corner of the cover to the sawmill.   :P

My shield has 3 bolts on top and 2 on the very bottom you can't see in the pic. I guess
my hole is a vent.  ;D
The older I get I wish my body could Re-Gen.

Magicman

I have 3 on top, 2 on the bottom, and 1 in that corner.   ;D
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

POSTON WIDEHEAD

Quote from: Magicman on February 18, 2018, 09:38:27 PM
I have 3 on top, 2 on the bottom, and 1 in that corner.   ;D

:D :D :D
The older I get I wish my body could Re-Gen.

POSTON WIDEHEAD

The older I get I wish my body could Re-Gen.

Magicman

Just look on that fancy dashboard and while you are at it, I want an order of fries with mine.   :D
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

POSTON WIDEHEAD

Quote from: Magicman on February 18, 2018, 09:42:06 PM
Just look on that fancy dashboard and while you are at it, I want an order of fries with mine.   :D

food6
The older I get I wish my body could Re-Gen.

starmac

WHERE HAVE YOU STUCK YOURS

It took a while to work up enough nerve to open this thread.
Old LT40HD, old log truck, old MM forklift, and several huskies.

Southside

Was it the movie "A knights tale" where the knight is telling the girl about sticking it into all kinds of places he was not supposed to including a tree until one day the tip broke off?  She gasps and only then do you realize that he is talking about his sword.  My mind went right to that scene.   :D
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

Darrel

Don't have any so haven't stuck'em. I'll have to see what it takes to get some.
1992 LT40HD

If I don't pick myself up by my own bootstraps, nobody else will.

Kbeitz

I got a whole box of holes here if anyone is missing some...
Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work

Darrel

The sticker source is busted but no worries, the boss is fixing it.
1992 LT40HD

If I don't pick myself up by my own bootstraps, nobody else will.

Thank You Sponsors!