How are things going?
If your tract is to be logged, are you supposed to mark the 'take' trees or the 'leave' trees? Is there a certain color or does it vary a lot?
Do you favor using flagging or paint and what is most common? If paint, how do you mark it and do you just use a brush or what? TIA!
Do you favor using flagging or paint and what is most common? If paint, how do you mark it and do you just use a brush or what? TIA!
After struggling with choosing the right lubricant for years, I finally upgraded my LT40 with a Lubemizer setup. Pine has always seemed to be the biggest offender and causes me the most issues with pitch build up. I have been able to deal with it using water and cotton picker spindle lube, but I would...
This is my first post here
Does anyone have any experience with the common mills sold at auctions, like the AGT or TMG brands.
I'm well aware that they aren't top of the line, just wondering if they're good enough for occasional use if gotten at a decent price.
Thanks for any info
Does anyone have any experience with the common mills sold at auctions, like the AGT or TMG brands.
I'm well aware that they aren't top of the line, just wondering if they're good enough for occasional use if gotten at a decent price.
Thanks for any info
First time owner/user. Brought home a 1989 LT40 yesterday. Everything worked when checking it out in the morning. Towed it home. Loader arms chained in up position. I pushed the forward and reverse feed lever and it engaged just for a second. After that no movement even for an inch or two. Feed motor...
Good day folks.
I'm hoping some of you who have done this in various ways will chime in with what works best and what hasn't.
I have a range road 36 mill and have replaced my cable crank with a 12v winch which has made life much easier. However I'm finding there is still a lot of variability in the travel speeds and I spend a lot of time trying to make tiny movements to get the mill head where I want it.Read More
I'm hoping some of you who have done this in various ways will chime in with what works best and what hasn't.
I have a range road 36 mill and have replaced my cable crank with a 12v winch which has made life much easier. However I'm finding there is still a lot of variability in the travel speeds and I spend a lot of time trying to make tiny movements to get the mill head where I want it.