iDRY Vacuum Kilns

Sponsors:

mantis carb settings

Started by simonmeridew, March 29, 2015, 08:15:33 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

simonmeridew

I just "rebuilt" the carb-Walbro- on an old 2 cycle mantis from my mom's estate. Old gas set in it for 5 years. New gas line, new gas and got it started. I set the hi and lo screws out 1 turn like on my stihls, but don't know what the setting should really be. It runs ok 1 turn out but don't want to lean it out too much with the wrong setting. What should it be?

simonmeridew
Kubota L4400, Farmi 351

yukon cornelius

3/4 -1 works on every thing I know of.
It seems I am a coarse thread bolt in a world of fine threaded nuts!

Making a living with a manual mill can be done!

Thank You Sponsors!