iDRY Vacuum Kilns

Sponsors:

Setworks

Started by LeeB, June 11, 2018, 11:30:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

LeeB

My old setworks laid down on me yesterday and I took it off and converted back to manual today. A lot of corrosion on there. I may try to clean it up and see if that helps. There are no longer any parts available for it so if cleaning doesn't do the trick it may well be toast.
'98 LT40HDD/Lombardini, Case 580L, Cat D4C, JD 3032 tractor, JD 5410 tractor, Husky 346, 372 and 562XP's. Stihl MS180 and MS361, 1998 and 2006 3/4 Ton 5.9 Cummins 4x4's, 1989 Dodge D100 w/ 318, and a 1966 Chevy C60 w/ dump bed.

Southside

There is an Accuset that just showed up for sale in the For Sale section
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

LeeB

I saw that but I doubt Lindy would be any too happy about me spending $500 for one even though it is a good price.
'98 LT40HDD/Lombardini, Case 580L, Cat D4C, JD 3032 tractor, JD 5410 tractor, Husky 346, 372 and 562XP's. Stihl MS180 and MS361, 1998 and 2006 3/4 Ton 5.9 Cummins 4x4's, 1989 Dodge D100 w/ 318, and a 1966 Chevy C60 w/ dump bed.

tylerltr450

Why not trouble shoot the system look for the main power and follow it around and see if you can find the issue. Maybe something simple to repair.
Timber Harvester 36HTD25 fully loaded
2006 Dodge 2500 first Auto to NV5600 swap, EFI Live Tune by me
John Deere Tractor
Massey Ferguson 711B SkidSteer

LeeB

I plan to try to but I have to rewire the control center first. Had a wire short out yesterday and took several others with it.
'98 LT40HDD/Lombardini, Case 580L, Cat D4C, JD 3032 tractor, JD 5410 tractor, Husky 346, 372 and 562XP's. Stihl MS180 and MS361, 1998 and 2006 3/4 Ton 5.9 Cummins 4x4's, 1989 Dodge D100 w/ 318, and a 1966 Chevy C60 w/ dump bed.

Thank You Sponsors!