Just Sharing my Excitement

[beamero]

Just wanted to say I finally have my mill. Ended up selecting a LT40HD! I havent had time to saw yet though. I work too much!

 

[sprucebunny]

Congratulations  8)

It must be driving you crazy waiting to make some dust !!!

[hunz]

Absolutely nothing better!......Now to just get some trees down....

[Magicman]

Congrats on the shiny new Orange Sawmill.  Your sawing time will come and we will be anxious to see the results.   ;D

[beamero]

I have around 75-100 white pine and poplar logs stacked and ready to go!

[thecfarm]

There.Lucky you. You will enjoy it.

[LaneC]

Congratulations. I bet that is a great feeling. One day I hope to be able to start on the same journey you are about to partake. Just an outsider looking in, from past posts you may want to check into a metal detector or ask the wiser sawyers on here about one. I hope you have a great time with your mill and congratulations again and be safe.

[Peter Drouin]

Good for you  8) 8) 8) 8) 8) 8) 8) 8) :D Have fun 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8)

[beamero]

Yeah, this is my first time with a bandsaw. Metal detector ready for batteries!

[Chuck White]

Congratulations on the shiney new sawmill, now go ahead and get it dirty.

[Bill Gaiche]

Congrats. bg

[thechknhwk]

Congrats!

[POSTON WIDEHEAD]

Hollar at me one day......I'll ride down. You're less than an hour away.  8)

[AnthonyW]

Pretty.

[thecfarm]

Take POSTON up on his offer. He will be a big help to you. I think he just wants to play with your orange,if the truth be known.  ;D

[Bill Gaiche]

Careful, he may charge you $300.00. bg

[Kipper]

Congrats on the new mill!!! Where abouts in SC are you? i wouldnt mind seeing a new one.

I wish POSTON would come see mine...  :'(

[goose63]

Careful, he may charge you $300.00. bg

thats what i was gonna say ;D

[tule peak timber]

Congratulations on the new mill !!! 8)

[brianb88]

Nice!       

[Delawhere Jack]

All shiny and new, with all the latest features!  Got to admit I'm a little jealous.

Maybe we should swap mills for a little bit until you get the hang of it......  :D

[Knute]

Congratulations! Keep it covered so it doesn't fade.

[Peter Drouin]

Cut a mill shed for it first. :D :D And paint all the nuts and bolts on it with ATF too.

[Bruno of NH]

Peter
What's up with the ATF ?

[Peter Drouin]

The ATF is good lube and the sawdust don't stick to it like motor oil. I use it all over my mill, When I go to take something apart it will come apart. I hate rust.  :D :D