iDRY Vacuum Kilns

Sponsors:

Tanaka 33cc top handle saw

Started by DelawhereJoe, March 29, 2018, 02:10:42 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

DelawhereJoe

Do any of you guys one or have the Hitachi copy of it ? If you do or have used one can you please give me your experience with it.
WD-40, DUCT TAPE, 024, 026, 362c-m, 041, homelite xl, JD 2510

Gary Davis

don't have that on but I do have the sthl ms 150 tc  top handle weighs about 5.7  lbs loop on one end to tie a rope to  ,I can run it one handed with either hand . only down side is I have to use ethanol free gas or it leaves a residue in the jet and plugs it  ( all the new smaller sthl need it )  the next size up was
a lot cheaper but it weighed a few mor lbs







[th]MS 150 T C-E Specifications [/th]
DISPLACEMENT23.6 cc (1.44 cu. in.)
ENGINE POWER1.0 kW (1.34 bhp)
POWERHEAD WEIGHT2.6 kg (5.7 lbs)
FUEL CAPACITY200 cc (6.76 oz.)
CHAIN OIL CAPACITY150 cc (5.07 oz.)
OILOMATIC® CHAIN1/4" PM3
GUIDE BAR LENGTHS (Recommended ranges)30 cm (12")
STIHL ROLLOMATIC® E Mini
POWER SOURCEGas
STIHL recommends #3670 (71 PM3 64) OILOMATIC® saw chain and 12" 3005 008 3405 Emati

DelawhereJoe

WD-40, DUCT TAPE, 024, 026, 362c-m, 041, homelite xl, JD 2510

Canadiana

Are they different than the cs330t
The saw is more fun than the purpose of the wood... the forest is trembling 🌳

Canadiana

The saw is more fun than the purpose of the wood... the forest is trembling 🌳

Thank You Sponsors!