iDRY Vacuum Kilns

Sponsors:

TJ 230 pinion nut removal

Started by BurkettvilleBob, January 03, 2018, 06:37:26 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

BurkettvilleBob

Any secret to removing the pinion nut on this thing. My buddy is trying to change the seal on his rear diff and says the nut won't budge. He did remove the cotter pin.

bushmechanic

Nope no secret procedure there. A long bar will help and you may have to hold the yoke with a big pipe wrench.

BurkettvilleBob

Thanks for the reply, I didn't think there was. He's just a little fella, probably needs a bigger bar.

Gearbox

May have used loc tite  a little heat will fix that 300 degrees .
A bunch of chainsaws a BT6870 processer , TC 5 International track skidder and not near enough time

Neilo

Long bar. Make sure blade is down so machine doesn't move. Helps if the drive and socket are able to fit out towards the tire.

Thank You Sponsors!