The Forestry Forum

General Forestry => Drying and Processing => Topic started by: Den Socling on December 18, 2010, 01:03:19 PM

Title: Kiln operation manuals
Post by: Den Socling on December 18, 2010, 01:03:19 PM
Drying Hardwood Lumber

http://www.fpl.fs.fed.us/documnts/fplgtr/fplgtr118.pdf
Title: Re: Kiln operation
Post by: Den Socling on December 18, 2010, 01:06:38 PM
Dry Kiln Operator's Manual

http://www.fpl.fs.fed.us/documnts/usda/ah188/intro_gloss_index.pdf
Title: Re: Kiln operation manuals
Post by: harrymontana on December 27, 2012, 05:36:53 PM
very good post, thank you very much, sometimes a new hardwood tends to behave just slightly different and all we can do is wonder why. With this manual we have a much better understanding. Thank you.
Title: Re: Kiln operation manuals
Post by: kevin19343 on October 22, 2013, 06:11:16 PM
WOW!!! A ton of great info in these manuals. Thanks so much for posting this info.
Title: Re: Kiln operation
Post by: Solomon on November 02, 2013, 08:30:47 AM
Quote from: Den Socling on December 18, 2010, 01:06:38 PM
Dry Kiln Operator's Manual

http://www.fpl.fs.fed.us/documnts/usda/ah188/intro_gloss_index.pdf
Thanks for those downloads Dan.
A kiln is on my list of things to build.  You've been a huge help to my with those posts.  Thanks again!
Title: Re: Kiln operation manuals
Post by: jzahrt on January 23, 2019, 02:05:12 PM
I was wondering if there was a thread about actual owners manuals for nyle systems. I have recently purchased a nyle l300 and don't have a complete owners manual.
Title: Re: Kiln operation manuals
Post by: Jeff on January 23, 2019, 03:31:11 PM
Call Nyle, they should be able to help you out.
Title: Re: Kiln operation manuals
Post by: jzahrt on January 23, 2019, 04:45:14 PM
They no longer send out manuals for systems and the wiring diagram they would send out for it is for newer model so it is only a partial. I have an electrician who may be able to put it together but I would rather have both full documents.
Title: Re: Kiln operation manuals
Post by: jzahrt on January 23, 2019, 04:45:35 PM
Thank you for getting back to me