iDRY Vacuum Kilns

Sponsors:

Ignition issues

Started by Dudaks, May 14, 2017, 09:34:11 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Dudaks



I am having issues with my ignition wire on my LT 40 HD. Originally thought my starter solenoid was the problem. As far as I can tell the ignition wire enters this part I have shown in the picture. Does anyone know what this part is and what its purpose is? I am currently having to jump the stater solenoid to start my mill. Using the ignition switch only makes a clicking noise coming from the control box and it is showing an error code. Any help would be appreciated.

Thanks,

Fred

Remle

Dudaks
We need more information in order to, try to give any advice as to what your problem may be. The age of your mill,engine make, serial number/ model and the error code if you can read it. FYI, if it is a Kohler, you can go to the kohler web site and down load the manual for free for your motor. It will tell you how to access the ECM to get the code and then point to where the problem lies.  I have no idea on the function of part you are showing. Sorry I could not be of more help..

Thank You Sponsors!