Author Topic: timberking 1400 log turner/log clamp (Read 1186 times)

thelogsmith · « **on:** April 15, 2018, 09:38:31 PM »

Just wondering if anyone has done any macgyvering of the log turner on these. Have seen a few posts about it but haven't seen if anybody has had any luck. I've got a 1400 on order and utilizing the chain turner but taking it from manual to hydraulic is at the top of my to do list. And since I'm doing that I'll tackle the log clamp to make it 2 plane as well. Its always better if someone else works the bugs out first but and I can just follow directions>

DDW_OR · « **Reply #1 on:** April 16, 2018, 12:03:51 PM »

let me know if you need any photos of my TK-2000

Useful sawmill mods in Sawmills and Milling

thelogsmith · « **Reply #2 on:** April 17, 2018, 09:51:29 PM »

I'd definitely appreciate some photos and thanks for the link. I have a rough plan worked out to turn the manual chain turner to hydraulic, and thinking on log clamp. But as you well know the devils in the details

f350rd · « **Reply #3 on:** April 17, 2018, 11:54:02 PM »

thelogsmith, I have built my own chain type log tuners for my mill. I used wench and linear actuator for the movementson the turner all are 12 volts. I have turned logs up to 38" 16 to 20 feet with no problems.

DDW_OR · « **Reply #4 on:** April 18, 2018, 01:22:55 AM »

will take photos tomorrow of the turner, log stops, and log clamp

DDW_OR · « **Reply #5 on:** April 20, 2018, 01:20:26 AM »

log clamp

DDW_OR · « **Reply #6 on:** April 20, 2018, 01:26:06 AM »

log turner

thelogsmith · « **Reply #7 on:** April 21, 2018, 10:26:38 PM »

Thanks for the pictures . F350rd how did you attach the sprocket to the winch drum? The 1400 has a hand crank chain log turner that should be pretty easy to convert over to power like you did. And awesome looking fab work on the turner. DDW_Or thanks for taking pictures also. I can see headaches in my future fabbing the log clamp. cant decide whether to install an aux hyd pump and run hyd motors and cylinders on both or do linear actuator route. And I don't even have the saw yet already redesigning it.

Forestry Forum
Sponsored by: