iDRY Vacuum Kilns

Sponsors:

Fusion Combuster

Started by Dyerbrk, January 23, 2012, 06:53:04 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Dyerbrk

January 23, 2012, 06:53:04 PM
This fall I replaced my fusion combuster with the newer style along with all new firebrick and refractory panels. Since the upgrade my fusion combuster doesn't want to stay in place, it keeps coming off the air delivery tube part of the way so that gasification is limited. Anyone else run into this?   

doctorb

#1
January 23, 2012, 07:23:39 PM
What make/model of OWB do you have ?
My father once said, "This is my son who wanted to grow up and become a doctor.  So far, he's only become a doctor."

Dyerbrk

#2
January 23, 2012, 07:28:56 PM
E classic 2300, wood only 2008

stumper

#3
January 23, 2012, 08:12:59 PM
Nope my stays on and was a pretty tight fit.  I would suggest getting it in place and shimming the opposite side so it could not come off the tube

Dyerbrk

#4
January 23, 2012, 08:16:43 PM
What do you suppose I could use to shim it with?

stumper

#5
January 24, 2012, 06:34:22 AM
I would be hunting around for some steel.

Dyerbrk

#6
January 29, 2012, 08:55:52 AM
Got er' shimmed, seems to be into place tight. Thanks for the help!
Print
Go Up Pages1
User actions

Thank You Sponsors!