iDRY Vacuum Kilns

Sponsors:

L 785 skid steer

Started by pydana, December 21, 2009, 09:22:01 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

pydana

hello to everyone. i,m living in the virgin islands. i have a skid steer L785 it used to lift load very good, all of a sudden it does,t have any lifting power. the engine works great but i can,t lift cotton it this bucket.

i join so that i could find someone who could help me with my answer to get this baby lifting well again.if anyone has an answer to for me to get this fix, please i need your expertise here.


thanks so much

Cedarman

You may have blown the seals in one of the cylinders.  Does the tilt work?
I am in the pink when sawing cedar.

Coon

I would think the first thing to do would be to change out the hydraulic oil filters.  Once this is accomplished a person could better tell if there is problems further down the line if the filters do not do the trick. 

Brad.
Norwood Lumbermate 2000 w/Kohler,
Husqvarna, Stihl and, Jonsereds Saws

Mark K

If changing the filters doesnt work lift the seat up and under there there is a plug that will take a half inch drive ratchet, remove it and you'll find a screen.Might be plugged. If not check pump drive. They are known to shear but usaully in colder climates where the oil would be thick.
Husky 372's-385's,576, 2100
Treefarmer C7D
Franklin 405
Belsaw m-14 sawmill

Thank You Sponsors!