Frame design and joinery check

[Phil H.]

Hey all,

I've gleaned so much good info over the years, and I finally have a project that would be great to have some extra eyes on.  All criticism is welcome.

A bit of info that may not be clear in the images:

-Building is ~24x32
-Tie beams, exterior posts and top plates are 7x10's.
-The two top plates will be scarfed together (not butted as in the model).
-Interior posts are 7x7
-Braces are 3x5
-Ridge beam is 3x12, and the 7x7 posts will have a fork that the ridge beam will be seated in.
-The roof is more or less conventionally framed with 2x10
-Roof pitch is 5:12...no snow load here...just plenty of rain.

Thanks for any input.

Front:



Top:



Back: