iDRY Vacuum Kilns

Sponsors:

Nyle L200

Started by ahlkey, December 20, 2009, 08:17:16 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

DR_Buck

8' stack width is to wide.   You'll have trouble getting enough air pushed across that much surface area.  Especially if you're only using the two Nyle fans.   Even with added fans you might have trouble.   I stack 4' wide and can go up to about 5' in height.   

My biggest problem in loading the kiln is random or mixed lengths.  When you have different lengths of lumber you loose a lot of kiln space.   My kiln chamber is 19'x8'x7.5' and I'm lucky to get 1800 bf in at a time.   The only way I can get close to the 2200 bf it should hold is if I have all 9' long lumber.
Been there, done that.   Never got caught [/b]
Retired and not doing much anymore and still not getting caught

Thank You Sponsors!