iDRY Vacuum Kilns

Sponsors:

Sealing Wood Product Question

Started by forrestM, May 11, 2018, 10:52:27 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

forrestM

Hey There,

What are the options, if any, for organic or environmentally safe products for sealing end grain? 

Thanks,
Forrest

DaveinNH

UC Coatings describes Anchorseal as "a stable, non-toxic, non-hazardous wax and water emulsion". Plus you can buy it directly from them in 5 gallon pails at a reasonable price.  
Wood-Mizer LT40HD26     Polaris 6x6 Big Boss
Ariens 34 Ton Splitter       Stihl 460, 261, 70

WDH

They have a "green" or environmentally friendly formulation.  Whatever that means :)
Woodmizer LT40HDD35, John Deere 2155, Kubota M5-111, Kubota L2501, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

Larry

I use Anchorseal on logs occasionally.  I think it is pretty benign stuff but you can check out the MSDS here.

http://uccoatings.com/wp-content/uploads/2015/09/ANCHORSEAL-2_G_SDS.pdf

I used to hang around a walnut mill years ago that sawed thousands of gun stock blanks.  They dipped each end in melted paraffin, sometimes sold as canning wax.  Has to be pretty safe.  I have a roaster oven filled with the stuff, that I dip turning stock in.  When the the blanks are to heavy to lift, I paint it on.  Works better than Anchorseal, but a lot slower to apply.  Can't really imagine using it for lumber.  
Larry, making useful and beautiful things out of the most environmental friendly material on the planet.

We need to insure our customers understand the importance of our craft.

Ianab

Anchorseal  is basically a paraffin wax emulsion in water. Pretty safe and environmentally benign. About as dangerous as preserving wax and soap. 

From the MSDS, safe disposal is to let it dry out and leave a block of wax that can be safely dumped or burnt.  It does say not to eat it, or get it in your eyes, but that's just common sense with wax and soap.   :D
Weekend warrior, Peterson JP test pilot, Dolmar 7900 and Stihl MS310 saws and  the usual collection of power tools :)

Pabene

I have used the same product as you have to prepare the walls, behind the tile in bathrooms. I like it as it is compleatly airtight. You can put it on, immediately after the logs are "on the ground". Then you can cut the logs in your mill and still have your boards sealed in its ends.

Thank You Sponsors!