source of timer in oregon

[charliej]

where can i get beams in portland oregon area
thanks
charlie

[analog animal]

Pretty much any good log should have one.

[loganworks2]

Click on the Woodmizer add on the left and then services. There you can look up a local Sawyer that is in their pro Sawyer network. Or you can use the forum members map and see who is in your area.

[charliej]

thanks i check it out

[Stuart Caruk]

We're just North of Portland, what is it that you need?

We're about a mile from exit 11 off of I5 which would put us 11 miles on the North side of Portland. We cut big Fir beams all the time.

[charliej]

4-6x6x8
2-6x6x10
20-4x4x8
2-6x6x14
2-6x8x10
2-6x8x12
5-4x6x10
thanks
douglas fir rough cut #1 or #2 or better some wane ok

[Brad_bb]

Don't forget to specify species, rough sawn or planed, boxed heart or FOH, grade (like No. 1 or better or No. 2 or better, or Select).  Is any wane or sapwood allowed?

[Meadows Miller]

Gday 

If you haven't already got them try Hull Oaks sawmill in Monroe OR they saw some nice timber 

Regards Chris