iDRY Vacuum Kilns

Sponsors:

Jonsered 630 and 670

Started by micky boy, August 23, 2006, 06:28:46 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

micky boy

A friend of minehas got a jonny 630 and a 670, now heres the problem.
Bothn saws are now on the shelf, have been for some time, the 670has done about one months work alltogether whilst the 630 has had enough. The 670 has a cracked crankcase behind the oil pump.
Will the crankcase off the 630 fit in place of the one on the 670 and make a dang good saw again.
Obviously with new bearings etc, etc, etc.
Thanks
Three Five Seven............Chainsaw Heaven

Albertcounty hillbilly

Yes they will fit,over the years they had different ignition systems.
The mounting pads are different.It would be easiest to change the jug
and piston from the 670 to the630.

micky boy

Three Five Seven............Chainsaw Heaven

SawTroll

Information collector.

Thank You Sponsors!