iDRY Vacuum Kilns

Sponsors:

Glue

Started by Tom Sawyer, July 07, 2007, 05:08:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Tom Sawyer

On my Woodmizer the little blocks that go under the blade guide roller (I forget the technical term :P) sometimes come unglued.  The first time it happened they told me just to glue it.  I have been experimenting with different kinds of glue and so far the best that I have used for this job is called Gorilla Glue.  It seems to hold at least as long as whatever Woodmizer uses ;D.  What kind of glue do the rest of you use?

hiya

One thing, make sure you have all the old glue scraped off. Epoxy may work.
Richard
RichardinMd.

Leatherneck

Not much that Gorilla Glue won't do.

LT40HDD51

Ive used a 2-part epoxy, the kind that comes in a big double syringe. Seems to work good...
The name's Ian. Been a sawyer for 6 years professionally, Dad bought his first mill in '84, I was 2 years old :). Factory trained service tech. as well... Happy to help any way I can...

Thank You Sponsors!