iDRY Vacuum Kilns

Sponsors:

Member's Map

Started by Magicman, February 15, 2018, 07:33:02 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Magicman

Jeff now has the Member's Map up and running, so I would encourage everyone to check their pin for accuracy and let's use the map.  Click on the Satellite view and zoom in tight with the + and you can actually place your pin on your rooftop.
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

Jeff

Yea, a lot of you are goona drown if you don't move your pins!  I'm guessing they were placed without zooming in on the map to do so, so they were way off.

I just did a little more tweaking to the format of it now that is is running, so when you click on a name in the right column, you will see the profile info better, and can click and go to that profile.
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Ljohnsaw

I had to fine tune my map pin.  In Map mode, it was right on my house, but in Satellite mode, it was on my neighbor's house.  So now, the pin is in the top corner in Map and bottom corner in Sat.
John Sawicky

Just North-East of Sacramento...

SkyTrak 9038, Ford 545D FEL, Davis Little Monster backhoe, Case 16+4 Trencher, Home Built 42" capacity/36" cut Bandmill up to 54' long - using it all to build a timber frame cabin.

Jeff

A short video tutorial on how to accurately place your pin on the members map. Remember, the map is only available to members.

Setting your location pin on the Forestry Forum Members map - YouTube
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Thank You Sponsors!