iDRY Vacuum Kilns

Sponsors:

Husqvarna: metric or sae?

Started by gman98, January 01, 2018, 06:12:43 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

gman98

January 01, 2018, 06:12:43 PM
Hello guys.  Looking to get myself a set of T handle Allen wrenches for working on saws, and was wondering if husqvarna saws take a metric or sae wrench?  I am assuming metric due to nationality of manufacturing, but figured I'd double check.

Thanks
Forest technician and part time equipment operator.  Looking to get set up with some logging equipment of my own.

decableguy2000

#1
January 01, 2018, 10:45:45 PM
Metric 99% of the time. A couple models use SAE bolts on the cylinder.

ladylake

#2
January 02, 2018, 04:42:23 AM
 
Make sure to buy some good quality ones.  Steve
Timberking B20  18000  hours +  Case75xt grapple + forks+8" snow bucket + dirt bucket   770 Oliver   Lots(too many) of chainsaws, Like the Echo saws and the Stihl and Husky     W5  Case loader   1  trailers  Wright sharpener     Suffolk  setter Volvo MCT125c skid loader

sablatnic

#3
January 02, 2018, 09:15:29 AM
Metric on the Swedish saws and sae on most of the Poulan husqvarnas. And a 3/16 wrench for the cylinders on the 266 series.
Print
Go Up Pages1
User actions

Thank You Sponsors!