The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: sandhills on September 18, 2010, 12:14:50 PM

Title: circle mill parts
Post by: sandhills on September 18, 2010, 12:14:50 PM
Does anyone know where I might find a decal for the scoreboard (think thats what it's called) on my carriage, or would it be as simple to measure and mark it myself, ours is worn off.  Also missing one logdog.  This is for a belsaw I beleive but not sure of the model as the tag is worn too.  Thanks, Pat
Title: Re: circle mill parts
Post by: bandmiller2 on September 18, 2010, 08:29:38 PM
Sandhills, mine was so faded and worn that I screwed on an aluminum yardstick and made up a chart by adding boards and cumulative kerfs.I hope someone can give you a better answer I would think any older circle mill builder thats still around could supply you with one their all pretty much the same.Frank C.
Title: Re: circle mill parts
Post by: Joe Lallande on September 22, 2010, 06:00:38 AM
Contact the good people at Timberking. They still have a supply of Belsaw parts.  Ask for Mark.
Title: Re: circle mill parts
Post by: sandhills on September 23, 2010, 12:32:37 AM
thanks guys