The Forestry Forum is sponsored in part by:

0 Members and 1 Guest are viewing this topic.

Something that I left out is what I am trying to accomplish. I am trying to trim off the edges to a straight edge for my four sided planer.

Sprocket math is easy, divide the tooth counts and multiply by the motor speed. For example if you have a 12 tooth sprocket on the motor and a 48 on the conveyor, 12/48=.25. Multiply .25 x 3450=862.5 rpm

Started by zach613 on Chainsaws

Started by Cam460 on Chainsaws

Started by Plankton on Technical Support Topics

Started by ckprivette on Timber Framing/Log construction