The Forestry Forum is sponsored in part by:

iDRY Vacuum Kilns


Forestry Forum
Sponsored by:


TimberKing Sawmills



Toll Free 1-800-582-0470

LogRite Tools



Norwood Industries Inc.




Your source for Portable Sawmills, Edgers, Resaws, Sharpeners, Setters, Bandsaw Blades and Sawmill Parts

EZ Boardwalk Sawmills. More Saw For Less Money!

STIHLDealers.com sponsored by Northeast STIHL


Woodland Sawmills

Peterson Swingmills

 KASCO SharpTech WoodMaxx Blades

Turbosawmill

Sawmill Exchange

Michigan Firewood, your BRUTE FORCE Authorized Dealer

FARMA


Council Tool

Baker Products

ECHO-Bearcat

iDRY Wood Lumber Vacuum Drying for everyon

Baltic Abrasives Technologies Nyle Kiln Dry Systems




Author Topic: 73Int.H30 loader  (Read 574 times)

0 Members and 1 Guest are viewing this topic.

Offline Vautour

  • member
  • *
  • Posts: 42
  • Age: 55
  • Location: Richibucto New-Bruuswick Canada
  • Gender: Male
  • I'm new!
    • Share Post
73Int.H30 loader
« on: January 20, 2019, 01:51:43 PM »
............ hi guys.bought this IH30 two years ago that had a seized up 100HP gas job.. and installed a130HP John Deer marine engine in it's place...lots a power and very fuel efficient... my power steering is on the weak side... any suggesting ???
the Gospel is WANTED by the people in 52 Countries but made illegal by their Government

Offline thecfarm

  • Senior Member x2
  • *****
  • Posts: 28045
  • Age: 57
  • Location: Chesterville,Maine
  • Gender: Male
  • If I don't do it,it don't get done
    • Share Post
Re: 73Int.H30 loader
« Reply #1 on: January 20, 2019, 05:43:29 PM »
Yea,have it trucked to Chesterville,Maine. :D   :D 
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Offline Bruno of NH

  • Senior Member x2
  • *****
  • Posts: 2733
  • Age: 53
  • Location: Springfield NH
  • Gender: Male
    • Share Post
Re: 73Int.H30 loader
« Reply #2 on: January 20, 2019, 05:48:20 PM »
That will push some snow
thomas 8013 mill ,Mahindra 3540 cab tractor loader  Dump trailer  and lot of contracting tools

Offline Vautour

  • member
  • *
  • Posts: 42
  • Age: 55
  • Location: Richibucto New-Bruuswick Canada
  • Gender: Male
  • I'm new!
    • Share Post
Re: 73Int.H30 loader
« Reply #3 on: January 20, 2019, 06:03:28 PM »
   Thecfarm.... haha  good one...the problem is I don't know where Chesterville is??... besides....i'll be needing this after you stop sending this snow storm north of your boarder...(don't believe this was part of the new trade deal between US and Canada) :D ...  should have written (first Dodge Ram) in the last pics
the Gospel is WANTED by the people in 52 Countries but made illegal by their Government

Offline thecfarm

  • Senior Member x2
  • *****
  • Posts: 28045
  • Age: 57
  • Location: Chesterville,Maine
  • Gender: Male
  • If I don't do it,it don't get done
    • Share Post
Re: 73Int.H30 loader
« Reply #4 on: January 20, 2019, 09:49:14 PM »
I will send directions. Check your mail. :D  :D  :D  :D
I was lucky,only got maybe a foot. But the wind made the storm worse than what it was. And I do mean wind. :o
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Offline mike_belben

  • Senior Member x2
  • *****
  • Posts: 4402
  • Location: Middle TN
  • Pulp Friction
    • Share Post
Re: 73Int.H30 loader
« Reply #5 on: January 20, 2019, 10:02:18 PM »
You need to determine if you have low pressure and good cylinders, or good pressure and bad cylinders first.  If you just want to dive in and take stuff apart, the relief valve is always a good place to find a tiny piece of junk gumming up the works.   If you have a temp gun, find the hottest spot in the sytem.  Fluid doing no work dissipates its energy as heat.  If thats near a relief valve, walla.  Also check temp on your steer valve, it could be worn.  Could be the pump, could be a flow control valve or bad tee causing a pressure drop, etc etc.  Trick is to narrow this all down in an efficient fashion.  Let us know what you find. 
Revelation 3:20

Offline Vautour

  • member
  • *
  • Posts: 42
  • Age: 55
  • Location: Richibucto New-Bruuswick Canada
  • Gender: Male
  • I'm new!
    • Share Post
Re: 73Int.H30 loader
« Reply #6 on: January 22, 2019, 04:12:53 AM »
          Thanks Mike_belban for the tips... will do the temp gun thing after next storm... just hopping its nope the steering box itself :'(...process of elimination rightthumbs-up... was talking to my cousin last night who had a  loader problem and everybody told him it sound like the injector pump..soooo after a $3500 pump rebuilt.. turned out to be a head gasket (me :D :D) (him :'( :'()just kidding, I did show compassion... Prov 14;12   
the Gospel is WANTED by the people in 52 Countries but made illegal by their Government

Offline Vautour

  • member
  • *
  • Posts: 42
  • Age: 55
  • Location: Richibucto New-Bruuswick Canada
  • Gender: Male
  • I'm new!
    • Share Post
Re: 73Int.H30 loader(stump removal)
« Reply #7 on: January 22, 2019, 06:02:20 AM »
 
 stump removal
 

the Gospel is WANTED by the people in 52 Countries but made illegal by their Government

Offline thecfarm

  • Senior Member x2
  • *****
  • Posts: 28045
  • Age: 57
  • Location: Chesterville,Maine
  • Gender: Male
  • If I don't do it,it don't get done
    • Share Post
Re: 73Int.H30 loader
« Reply #8 on: January 22, 2019, 06:14:33 AM »
If I dig out my stumps,I get one stump and 40 rocks. Than I have to go get dirt to fill the hole, one stump and 40 rocks made. Than I find 40 more rocks to fill up one stump hole. ::) 
When I had my land logged he used my road to the back field,made a mess of it. He brought his excavator over to smooth it back up. I was digging in a place to get dirt,hard on a tractor. I had him dig in that area and had him pile it up for me. Still have rocks in it,but at least it's all loose dirt and rocks now.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Offline mike_belben

  • Senior Member x2
  • *****
  • Posts: 4402
  • Location: Middle TN
  • Pulp Friction
    • Share Post
Re: 73Int.H30 loader
« Reply #9 on: January 22, 2019, 02:43:19 PM »
Nice ripper.  For little grubbing i found a single moldboard bottom plow works great.  Make a pass on each side and turn it over. 
Revelation 3:20


Share via delicious Share via digg Share via facebook Share via linkedin Share via pinterest Share via reddit Share via stumble Share via tumblr Share via twitter

xx
Wanted log loader trailer or truck mounted loader

Started by 03westernstar on Wanted

3 Replies
1206 Views
Last post October 09, 2014, 02:13:42 AM
by backwoods sawyer
xx
can't tell what loader I have

Started by graves logging on Forestry and Logging

10 Replies
1346 Views
Last post July 26, 2012, 07:16:38 PM
by Jeff
xx
Log loader

Started by Scott Garrett on Forestry and Logging

6 Replies
1262 Views
Last post October 22, 2015, 10:35:27 PM
by millcreek40
xx
Which log loader to buy

Started by hobby logger on Forestry and Logging

10 Replies
5905 Views
Last post November 08, 2010, 09:33:06 PM
by firefighter
 


Powered by EzPortal