The Forestry Forum is sponsored in part by:

iDRY Vacuum Kilns


Forestry Forum
Sponsored by:


TimberKing Sawmills



Toll Free 1-800-582-0470

LogRite Tools



Norwood Industries Inc.




Your source for Portable Sawmills, Edgers, Resaws, Sharpeners, Setters, Bandsaw Blades and Sawmill Parts

EZ Boardwalk Sawmills. More Saw For Less Money!

STIHLDealers.com sponsored by Northeast STIHL


Woodland Sawmills

Peterson Swingmills

 KASCO SharpTech WoodMaxx Blades

Turbosawmill

Sawmill Exchange

Michigan Firewood, your BRUTE FORCE Authorized Dealer

FARMA


Baker Products

ECHO-Bearcat

iDRY Wood Lumber Vacuum Drying for everyon

Nyle Kiln Dry Systems




Author Topic: Oops!  (Read 1863 times)

0 Members and 1 Guest are viewing this topic.

Offline Sheepkeeper

  • Full Member x2
  • ***
  • Posts: 111
  • Age: 62
  • Location: Strathroy, Ontario, Canada
  • Gender: Male
  • I'm not so new anymore!
    • Share Post
Oops!
« on: October 19, 2019, 09:24:55 AM »
 
<br
I guess I can tick this off the list of things that will>happen some day.  :D I used two boards to span the loader arms to load it on to the mill and just as it came off the loader I realised that I had forgotten to raise the manual backstops. It didn't roll fast but I still couldn't get there in time to stop it. Of course the customer was watching.  :D Had to use the FEL to get it back up on the mill.
The hurry-er I go the behind-er I get.

Offline Banjo picker

  • Senior Member x2
  • *****
  • Posts: 2844
  • Location: Iuka Ms
  • Gender: Male
  • A goal without a plan is just a dream. Elbert H.
    • Share Post
Re: Oops!
« Reply #1 on: October 19, 2019, 10:26:24 AM »
I am long since passed that one.  It has been a while but I am sure I will get back around to it.  Banjo
Cooks AC 36--Prentice 210C--Morgan edger--Kubota M7040 with loader--Case 580 K with extendahoe--Case 850C dozer--Int 1700 series twin cylinder dump/log/flatbed truck--logging arch--2 Logrite mill sp.--Cat claw sharpening system--And a bulldog to make sure it all stays here.

Offline WV Sawmiller

  • Senior Member x2
  • *****
  • Posts: 6741
  • Age: 66
  • Location: Hinton WV
  • Gender: Male
    • Share Post
    • Green's Sawmill Services
Re: Oops!
« Reply #2 on: October 19, 2019, 10:55:09 AM »
   I'm sure glad I've never done anything like that (At least not when anyone was around to see it :D).
Howard Green
WM LT35HDG25(2015) , 2009 4wd Dodge PU, Kawasaki 650 ATV, Sthil 440 & 441, homemade logging arch (w/custom built rear log dolly), JD 750 w/4' wide Bushhog brand FEL

Dad always said "You can shear a sheep a bunch of times but you can only skin him once"

Offline Banjo picker

  • Senior Member x2
  • *****
  • Posts: 2844
  • Location: Iuka Ms
  • Gender: Male
  • A goal without a plan is just a dream. Elbert H.
    • Share Post
Re: Oops!
« Reply #3 on: October 19, 2019, 11:18:50 AM »
@WV Sawmiller that is when you will do it.  Get you an audience and things will go wrong.  Thats why I usually just shut the mill down when someone comes up. Banjo
Cooks AC 36--Prentice 210C--Morgan edger--Kubota M7040 with loader--Case 580 K with extendahoe--Case 850C dozer--Int 1700 series twin cylinder dump/log/flatbed truck--logging arch--2 Logrite mill sp.--Cat claw sharpening system--And a bulldog to make sure it all stays here.

Offline WV Sawmiller

  • Senior Member x2
  • *****
  • Posts: 6741
  • Age: 66
  • Location: Hinton WV
  • Gender: Male
    • Share Post
    • Green's Sawmill Services
Re: Oops!
« Reply #4 on: October 19, 2019, 11:29:21 AM »
   Yes and the bigger the audience the bigger and more impressive the mistake you will make has been my experience. :D Kind of like when we were in school and there was some real cute girl you were trying to impress. That's when you'd fall flat on your face.
Howard Green
WM LT35HDG25(2015) , 2009 4wd Dodge PU, Kawasaki 650 ATV, Sthil 440 & 441, homemade logging arch (w/custom built rear log dolly), JD 750 w/4' wide Bushhog brand FEL

Dad always said "You can shear a sheep a bunch of times but you can only skin him once"

Offline KenMac

  • Full Member
  • **
  • Posts: 63
  • Age: 64
  • Location: Near Pell City, Alabama
  • Gender: Male
  • I'm new, but don't feel so new!
    • Share Post
Re: Oops!
« Reply #5 on: October 19, 2019, 12:12:22 PM »
Happened to me for the first time when a good friend stopped by to see the mill cut a log. He has a LT15. We both just laughed about it. :D
Cook's AC3667t, Cat Claw sharpener, Dual tooth setter, and Band Roller, Kubota B26 TLB

Online Magicman

  • Senior Member x2
  • *****
  • Posts: 38610
  • Age: 76
  • Location: Brookhaven, MS
  • Gender: Male
  • A "Traveling Man"
    • Share Post
    • Knothole Sawmill
Re: Oops!
« Reply #6 on: October 19, 2019, 03:49:28 PM »
Surely is funnier when someone else does it.  :D
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

Online terrifictimbersllc

  • Senior Member x2
  • *****
  • Posts: 4706
  • Age: 65
  • Location: Mystic, CT
  • Gender: Male
    • Share Post
    • Terrific Timbers LLC
Re: Oops!
« Reply #7 on: October 19, 2019, 05:03:30 PM »
Wondering how you saw with the fender on?
DJ Hoover, Terrific Timbers LLC,  Mystic CT Woodmizer Million Board Foot Club member. 2019 LT70 Super Wide,  Logrite fetching arch, WM BMS250 sharpener/BMT250 setter.  2001 F350 7.3L PSD 6 spd manual ZF 4x4 Crew Cab Long Bed

Offline WV Sawmiller

  • Senior Member x2
  • *****
  • Posts: 6741
  • Age: 66
  • Location: Hinton WV
  • Gender: Male
    • Share Post
    • Green's Sawmill Services
Re: Oops!
« Reply #8 on: October 19, 2019, 06:55:22 PM »
  The fender was left on to protect the tire from run-away logs. :D :D
Howard Green
WM LT35HDG25(2015) , 2009 4wd Dodge PU, Kawasaki 650 ATV, Sthil 440 & 441, homemade logging arch (w/custom built rear log dolly), JD 750 w/4' wide Bushhog brand FEL

Dad always said "You can shear a sheep a bunch of times but you can only skin him once"

Offline Chuck White

  • Senior Member x2
  • *****
  • Posts: 12055
  • Age: 70
  • Location: Russell, NY (Way Upstate)
  • Gender: Male
  • Sawing Mobile since 2005
    • Share Post
Re: Oops!
« Reply #9 on: October 19, 2019, 07:07:49 PM »
I've done that twice, both times, only the offbearer and myself were there, "honest"!

The only thing I've ever worried about was breaking the feed chain!
~Chuck~
Retired USAF (1989), Retired School Bus Driver (2012), and now a Mobile Sawyer
1995 Wood-Mizer LT40HDG2425 Kohler - Shingle & LapSider, Cooks Cat Claw Sharpener and single-tooth setter, 4-foot Logrite cant hook.
Basic mechanical skills are all that's required to maintain a Wood-Mizer

Offline KenMac

  • Full Member
  • **
  • Posts: 63
  • Age: 64
  • Location: Near Pell City, Alabama
  • Gender: Male
  • I'm new, but don't feel so new!
    • Share Post
Re: Oops!
« Reply #10 on: October 19, 2019, 08:30:27 PM »
Surely is funnier when someone else does it.  :D
Might as well laugh about it.....that's less messy than crying! Besides I just picked it up with my tractor and set it back on  the mill. No damage to anything except my pride.
Cook's AC3667t, Cat Claw sharpener, Dual tooth setter, and Band Roller, Kubota B26 TLB

Offline Cjross73

  • member
  • *
  • Posts: 37
  • Age: 46
  • Location: Mount Olive, NC Pickle town
  • Gender: Male
  • Work in progress
    • Share Post
Re: Oops!
« Reply #11 on: October 19, 2019, 09:00:24 PM »
I just did this yesterday demonstrating the log loading process to my step son. No pics but I got to cross that off the list
LT40, Stihl saw, Old green tractor

Offline Southside

  • Senior Member x2
  • *****
  • Posts: 5259
  • Age: 47
  • Location: Wilsons (Dinwiddie County), VA
  • Gender: Male
  • Have a plan to saw every log you meet.
    • Share Post
Re: Oops!
« Reply #12 on: October 19, 2019, 09:10:06 PM »
At this time, on the advice of council, I wish to invoke my 5th Amendment right not to say anything on the grounds I may incriminate myself.   :-X
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.

Offline Banjo picker

  • Senior Member x2
  • *****
  • Posts: 2844
  • Location: Iuka Ms
  • Gender: Male
  • A goal without a plan is just a dream. Elbert H.
    • Share Post
Re: Oops!
« Reply #13 on: October 19, 2019, 09:26:36 PM »
Any time someone takes the fifth....we immediately assume they are guilty.  So you might as well come clean.  Banjo
Cooks AC 36--Prentice 210C--Morgan edger--Kubota M7040 with loader--Case 580 K with extendahoe--Case 850C dozer--Int 1700 series twin cylinder dump/log/flatbed truck--logging arch--2 Logrite mill sp.--Cat claw sharpening system--And a bulldog to make sure it all stays here.

Online Magicman

  • Senior Member x2
  • *****
  • Posts: 38610
  • Age: 76
  • Location: Brookhaven, MS
  • Gender: Male
  • A "Traveling Man"
    • Share Post
    • Knothole Sawmill
Re: Oops!
« Reply #14 on: October 19, 2019, 09:39:14 PM »
I probably have ~6 of them on my "scoreboard",  2-3 pictured here on the FF.  :-X
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

Offline Southside

  • Senior Member x2
  • *****
  • Posts: 5259
  • Age: 47
  • Location: Wilsons (Dinwiddie County), VA
  • Gender: Male
  • Have a plan to saw every log you meet.
    • Share Post
Re: Oops!
« Reply #15 on: October 19, 2019, 09:56:12 PM »
The ones you throw off the mill with a chain turner and completely clear the tire - those are the ones you remember.   ;D
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.

Online Nebraska

  • Senior Member
  • ****
  • Posts: 263
  • Age: 52
  • Location: God's country or pretty close
  • Gender: Male
  • I'm new! Lurked for quite a while, learning !
    • Share Post
Re: Oops!
« Reply #16 on: October 19, 2019, 10:03:15 PM »
It's really irritating to roll on off your manual mill while using you can't hook. At least from what I gather. No witnesses.

Offline WDH

  • Forester
  • Administrator
  • *****
  • Posts: 29190
  • Age: 65
  • Location: Perry, GA
  • Gender: Male
  • April 1998 - August 2008
    • Share Post
    • hamsleyhardwood.com
Re: Oops!
« Reply #17 on: October 20, 2019, 07:16:53 AM »
Mr. Sheepkeeper, Sir,

I hate it when that happens :).  



 

BTW, this is the modified Robert's Reverse Roll Quartersawing Technique (RRRQS).  It requires a few more detailed steps than the one described in the manual  ;D.  
Woodmizer LT40HDD35, John Deere 2155, Kubota M5640SU, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

Online terrifictimbersllc

  • Senior Member x2
  • *****
  • Posts: 4706
  • Age: 65
  • Location: Mystic, CT
  • Gender: Male
    • Share Post
    • Terrific Timbers LLC
Re: Oops!
« Reply #18 on: October 20, 2019, 07:58:29 AM »
 

 

I see nothing!!!
DJ Hoover, Terrific Timbers LLC,  Mystic CT Woodmizer Million Board Foot Club member. 2019 LT70 Super Wide,  Logrite fetching arch, WM BMS250 sharpener/BMT250 setter.  2001 F350 7.3L PSD 6 spd manual ZF 4x4 Crew Cab Long Bed

Offline Old Greenhorn

  • Senior Member x2
  • *****
  • Posts: 1749
  • Age: 64
  • Location: Catskill Mountains, NY
  • Gender: Male
  • An old coot, still learning.
    • Share Post
Re: Oops!
« Reply #19 on: October 20, 2019, 08:07:45 AM »
AH! You guys with all that fancy powered equipment! Now us manual load and mill guys may be slow, but I for myself, have never rolled a log off like that. We are thoughtful and careful.  ;D :D
Oscar 328 Band Mill, Husky 450, 372 (Clone), Mule 3010, and too many hand tools. :) I mill for fun and my mental health. NYLT Certified.

I ain't the woodcutter, but I can cut wood 'til the woodcutter gets here.

Offline GAB

  • Senior Member x2
  • *****
  • Posts: 1487
  • Location: Charlotte, VT
  • Gender: Male
    • Share Post
Re: Oops!
« Reply #20 on: October 20, 2019, 12:52:56 PM »
AH! You guys with all that fancy powered equipment! Now us manual load and mill guys may be slow, but I for myself, have never rolled a log off like that. We are thoughtful and careful.  ;D :D
Unless you rid yourself of the mill yesterday, just like me, your turn is coming.
GAB
W-M LT40HDD34 w/6' ext & SLR, JD 420, JD 950w/loader and Woods backhoe, V3507 Fransguard winch, Cordwood Saw, 18' flat bed trailer, and other toys.

Offline GAB

  • Senior Member x2
  • *****
  • Posts: 1487
  • Location: Charlotte, VT
  • Gender: Male
    • Share Post
Re: Oops!
« Reply #21 on: October 20, 2019, 12:58:52 PM »
Mr. Sheepkeeper, Sir,

I hate it when that happens :).  


(Image hidden from quote, click to view.)
 

BTW, this is the modified Robert's Reverse Roll Quartersawing Technique (RRRQS).  It requires a few more detailed steps than the one described in the manual  ;D.  
Danny:
For some reason I think you got the wrong lever.  Got the log stop one instead of the clamp one.
Sure hope it does not take too long to rebuild you pride.
GAB
W-M LT40HDD34 w/6' ext & SLR, JD 420, JD 950w/loader and Woods backhoe, V3507 Fransguard winch, Cordwood Saw, 18' flat bed trailer, and other toys.

Offline Old Greenhorn

  • Senior Member x2
  • *****
  • Posts: 1749
  • Age: 64
  • Location: Catskill Mountains, NY
  • Gender: Male
  • An old coot, still learning.
    • Share Post
Re: Oops!
« Reply #22 on: October 20, 2019, 03:43:35 PM »
AH! You guys with all that fancy powered equipment! Now us manual load and mill guys may be slow, but I for myself, have never rolled a log off like that. We are thoughtful and careful.  ;D :D
Unless you rid yourself of the mill yesterday, just like me, your turn is coming.
GAB
No doubt! But today was not that day. Instead I chose a different 'first time for that'. I found some barbed wire....... the hard way. :-[ :-[
Oscar 328 Band Mill, Husky 450, 372 (Clone), Mule 3010, and too many hand tools. :) I mill for fun and my mental health. NYLT Certified.

I ain't the woodcutter, but I can cut wood 'til the woodcutter gets here.

Offline Sheepkeeper

  • Full Member x2
  • ***
  • Posts: 111
  • Age: 62
  • Location: Strathroy, Ontario, Canada
  • Gender: Male
  • I'm not so new anymore!
    • Share Post
Re: Oops!
« Reply #23 on: October 20, 2019, 05:30:23 PM »
Wondering how you saw with the fender on?
Easy, it's not in the way and I just step a little wider to get around it. I only leave it on when I'm sawing at home, on mobile jobs it comes off.
The hurry-er I go the behind-er I get.

Online terrifictimbersllc

  • Senior Member x2
  • *****
  • Posts: 4706
  • Age: 65
  • Location: Mystic, CT
  • Gender: Male
    • Share Post
    • Terrific Timbers LLC
Re: Oops!
« Reply #24 on: October 20, 2019, 05:35:31 PM »
Just surprised that the head clears the fender.  On my mills there is about 1-1/2 to 1-3/4 " clearance above the tire itself in a setup where most of the weight is taken off of the tire.  No way the head can pass by a fender.  Lt40 super or LT70 super
DJ Hoover, Terrific Timbers LLC,  Mystic CT Woodmizer Million Board Foot Club member. 2019 LT70 Super Wide,  Logrite fetching arch, WM BMS250 sharpener/BMT250 setter.  2001 F350 7.3L PSD 6 spd manual ZF 4x4 Crew Cab Long Bed

Offline Southside

  • Senior Member x2
  • *****
  • Posts: 5259
  • Age: 47
  • Location: Wilsons (Dinwiddie County), VA
  • Gender: Male
  • Have a plan to saw every log you meet.
    • Share Post
Re: Oops!
« Reply #25 on: October 20, 2019, 06:03:44 PM »
My 70 will pass by. Do you have the off set insert? 
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.

Online terrifictimbersllc

  • Senior Member x2
  • *****
  • Posts: 4706
  • Age: 65
  • Location: Mystic, CT
  • Gender: Male
    • Share Post
    • Terrific Timbers LLC
Re: Oops!
« Reply #26 on: October 20, 2019, 06:23:34 PM »
Yes- I was thinking about height.
DJ Hoover, Terrific Timbers LLC,  Mystic CT Woodmizer Million Board Foot Club member. 2019 LT70 Super Wide,  Logrite fetching arch, WM BMS250 sharpener/BMT250 setter.  2001 F350 7.3L PSD 6 spd manual ZF 4x4 Crew Cab Long Bed

Offline Southside

  • Senior Member x2
  • *****
  • Posts: 5259
  • Age: 47
  • Location: Wilsons (Dinwiddie County), VA
  • Gender: Male
  • Have a plan to saw every log you meet.
    • Share Post
Re: Oops!
« Reply #27 on: October 20, 2019, 06:56:05 PM »
Mine will clear it, I put it on before I park the head. 
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.

Online Magicman

  • Senior Member x2
  • *****
  • Posts: 38610
  • Age: 76
  • Location: Brookhaven, MS
  • Gender: Male
  • A "Traveling Man"
    • Share Post
    • Knothole Sawmill
Re: Oops!
« Reply #28 on: October 20, 2019, 10:01:29 PM »
Both of my fenders are the first things removed during setup and the last things installed after take down.  My saw head will not pass the right fender and the loader will not clear the left fender.  
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

Offline YellowHammer

  • Senior Member x2
  • *****
  • Posts: 4316
  • Age: 54
  • Location: New Market, Alabama
  • Gender: Male
  • Take Steps to Save Steps
    • Share Post
    • Hobby Hardwood Alabama
Re: Oops!
« Reply #29 on: October 21, 2019, 12:43:40 AM »
Ive done this particular Oops once or twice, but never was calm enough to snap a photo.  

Sooner or later, when during the RRRQS technique, there will be an over role.
HobbyHardwoodAlabama.com

Offline Bindian

  • Full Member x2
  • ***
  • Posts: 117
  • Age: 61
  • Location: Willis, Texas
  • Gender: Female
    • Share Post
Re: Oops!
« Reply #30 on: October 21, 2019, 01:03:42 AM »
The ones you throw off the mill with a chain turner and completely clear the tire - those are the ones you remember.   ;D
I did that yesterday with a 5.5 x 20 inch ten foot cant, with my turning claw.  Guess I blinked or something.  I was hot and ready for a break.  It went over the backstops, all but one.  Half on and half off.   I chained it to the the grapple and lifted it back onto the mill.  Going to get the tractor is what I call the walk of shame.
hugs,  Brandi
Mahindra 6520 4WD with loader/backhoe and a Caterpiller E70 Excavator.  My mill is a Woodmizer LT40HD Wide Diesel.

My Hero is Johnny Jett

Offline East ky logging

  • Full Member x2
  • ***
  • Posts: 138
  • Age: 47
  • Location: Magoffin co Kentucky
  • Gender: Male
    • Share Post
Re: Oops!
« Reply #31 on: October 21, 2019, 04:05:32 AM »
Ive done that a couple times myself. I have a lt-15 set up stationary and I do it when Im loading the log ramps up with logs and try to get one more on and push just a little bit and one will roll just right and across the mill it goes. 

Offline WDH

  • Forester
  • Administrator
  • *****
  • Posts: 29190
  • Age: 65
  • Location: Perry, GA
  • Gender: Male
  • April 1998 - August 2008
    • Share Post
    • hamsleyhardwood.com
Re: Oops!
« Reply #32 on: October 21, 2019, 07:04:46 AM »
Sooner or later, when during the RRRQS technique, there will be an over role.
The "Modified" Version ;D
Woodmizer LT40HDD35, John Deere 2155, Kubota M5640SU, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

Online terrifictimbersllc

  • Senior Member x2
  • *****
  • Posts: 4706
  • Age: 65
  • Location: Mystic, CT
  • Gender: Male
    • Share Post
    • Terrific Timbers LLC
Re: Oops!
« Reply #33 on: October 21, 2019, 07:59:53 AM »
Mine will clear it, I put it on before I park the head.
Hey-that's how to get around the little back bungee problem!  thumbs-up
DJ Hoover, Terrific Timbers LLC,  Mystic CT Woodmizer Million Board Foot Club member. 2019 LT70 Super Wide,  Logrite fetching arch, WM BMS250 sharpener/BMT250 setter.  2001 F350 7.3L PSD 6 spd manual ZF 4x4 Crew Cab Long Bed

Offline alanh

  • Senior Member
  • ****
  • Posts: 316
  • Location: Haddam Ct
  • Gender: Male
    • Share Post
Re: Oops!
« Reply #34 on: October 21, 2019, 08:15:25 AM »
the last time I did it was with a 16 'ft long 22" diameter red oak log, did I mention my mill is inside a shed, on blocking, 3 ft away from a concrete wall...getting the log out from between the mill and the wall was an adventure I`d rather forget, but the memory keeps me from doing it again,,, for a while

Offline Ed_K

  • Senior Member x2
  • *****
  • Posts: 2968
  • Age: 66
  • Location: Leyden,Ma.
  • Gender: Male
  • Leave it better than you found it. Ed_K
    • Share Post
Re: Oops!
« Reply #35 on: October 21, 2019, 08:48:04 AM »
 Alanh, I'm right with you exactly.The only diff. was mine was 14'. I spent a couple hrs getting it up enough to get a strap around to winch it out with the tractor. Ended up re-leveling the base then the mill.
Ed K

Offline Southside

  • Senior Member x2
  • *****
  • Posts: 5259
  • Age: 47
  • Location: Wilsons (Dinwiddie County), VA
  • Gender: Male
  • Have a plan to saw every log you meet.
    • Share Post
Re: Oops!
« Reply #36 on: October 21, 2019, 09:01:00 AM »
Mine will clear it, I put it on before I park the head.
Hey-that's how to get around the little back bungee problem!  thumbs-up
And that's why I do it that way. I can barely touch the front bungee, forget about the other one otherwise.
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.

Offline Sheepkeeper

  • Full Member x2
  • ***
  • Posts: 111
  • Age: 62
  • Location: Strathroy, Ontario, Canada
  • Gender: Male
  • I'm not so new anymore!
    • Share Post
Re: Oops!
« Reply #37 on: October 23, 2019, 07:23:02 AM »
Wondering how you saw with the fender on?
Easy, it's not in the way and I just step a little wider to get around it. I only leave it on when I'm sawing at home, on mobile jobs it comes off.
I have modified the dust chute to be more like that on the LT35 so that it throws the sawdust a little further away from the walking path. Probably wouldn't work without the mod. Here is a pic to illustrate. Sawhead is at 1 inch.


 
The hurry-er I go the behind-er I get.

Offline GDinMaine

  • Senior Member
  • ****
  • Posts: 548
  • Location: I love Maine!
    • Share Post
Re: Oops!
« Reply #38 on: November 01, 2019, 07:26:31 AM »
 

 I haven't done that ... more than 2 or three times. It took a few four letter words to put that back on there. 
It's the going that counts not the distance!

WM LT-40HD-D42

Offline petefrom bearswamp

  • Senior Member x2
  • *****
  • Posts: 3722
  • Age: 82
  • Location: Finger Lakes region of NY
  • Gender: Male
  • 70-12 still feel pretty good and going to retire
    • Share Post
Re: Oops!
« Reply #39 on: November 01, 2019, 08:01:07 AM »
I aint sayin nuthin
LT40SHDD51
Kubota 8540 tractor, Farmi winch
Kubota 900 RTV
Polaris 550 Sportsman ATV
1 Husky 1 gas Echo 1 cordless Echo vintage Homelite super xl12
241 acres of woodland

Online Magicman

  • Senior Member x2
  • *****
  • Posts: 38610
  • Age: 76
  • Location: Brookhaven, MS
  • Gender: Male
  • A "Traveling Man"
    • Share Post
    • Knothole Sawmill
Re: Oops!
« Reply #40 on: November 01, 2019, 08:21:19 AM »
I will say this; if that truck door stays open, the inside will get sawdust.  :o   Same as if a window in left open.  :-X
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

Offline Stephen1

  • Senior Member x2
  • *****
  • Posts: 1586
  • Age: 63
  • Location: Kilworthy ON> Canada
  • Gender: Male
  • Where there is a will, there is a way!
    • Share Post
    • muskoka Sawmill
Re: Oops!
« Reply #41 on: November 01, 2019, 08:32:10 AM »
I have doen it where it took a few hours to hand lift it back up at a customers,, no heavy equipment to lift it with. The last thing I do after I saw the last board is lift the back stops, move the clamp all the way out, then I shut down the mill aand move lumber and load a log on th arms.
IDRY Vacum Kiln, LT40HDWide, BMS250 sharpener/setter 742b Bobcat, TCM forklift, Sthil 026,038, 461. 1952 TEA Fergusan Tractor

Offline Banjo picker

  • Senior Member x2
  • *****
  • Posts: 2844
  • Location: Iuka Ms
  • Gender: Male
  • A goal without a plan is just a dream. Elbert H.
    • Share Post
Re: Oops!
« Reply #42 on: November 01, 2019, 01:28:05 PM »
That is the reason that if you have an energy chain (gooseneck) with your hydraulic lines in it... you always bring the mill back before you roll a log or cant.  Banjo
Cooks AC 36--Prentice 210C--Morgan edger--Kubota M7040 with loader--Case 580 K with extendahoe--Case 850C dozer--Int 1700 series twin cylinder dump/log/flatbed truck--logging arch--2 Logrite mill sp.--Cat claw sharpening system--And a bulldog to make sure it all stays here.

Offline SawyerTed

  • Senior Member
  • ****
  • Posts: 957
  • Age: 57
  • Location: Germanton, NC
  • Gender: Male
  • Summey Lumber Services, LLC
    • Share Post
Re: Oops!
« Reply #43 on: November 01, 2019, 07:32:43 PM »
My wife's cousin had me come to the home place of their grandparents to saw some 32" red oak logs.  Yep, rolled one over the back stops and off the mill.  No equipment to get the log back in place so I had to break the mill down and turn it around to get the log.  I was sawing the lumber for family (aka free of charge) so the time didn't matter.
Woodmizer LT35HD25, Kubota MX5100, IH McCormick Farmall 140, Granberg Alaskan Chainsaw Mill, Husqvarna 372XP, Husqvarna 455 Rancher, Ram 3500 6.7 Cummins

Offline Stephen1

  • Senior Member x2
  • *****
  • Posts: 1586
  • Age: 63
  • Location: Kilworthy ON> Canada
  • Gender: Male
  • Where there is a will, there is a way!
    • Share Post
    • muskoka Sawmill
Re: Oops!
« Reply #44 on: November 02, 2019, 08:33:07 AM »
My wife's cousin had me come to the home place of their grandparents to saw some 32" red oak logs.  Yep, rolled one over the back stops and off the mill.  No equipment to get the log back in place so I had to break the mill down and turn it around to get the log.  I was sawing the lumber for family (aka free of charge) so the time didn't matter.
On the WM they get stuck between the frame and the tire, not a good spot as you have to lift them out
IDRY Vacum Kiln, LT40HDWide, BMS250 sharpener/setter 742b Bobcat, TCM forklift, Sthil 026,038, 461. 1952 TEA Fergusan Tractor

Offline samandothers

  • Senior Member x2
  • *****
  • Posts: 2877
  • Location: Charlotte NC To SW Va.
  • Gender: Male
  • Been learning on FF since 1/20/12
    • Share Post
Re: Oops!
« Reply #45 on: November 02, 2019, 10:07:30 AM »
I just did this yesterday demonstrating the log loading process to my step son. No pics but I got to cross that off the list
I am sure you immediately shared this is to show what not to do and is part of the demonstration.


Share via delicious Share via digg Share via facebook Share via linkedin Share via pinterest Share via reddit Share via stumble Share via tumblr Share via twitter

xx
Oops

Started by Bill Gaiche on Sawmills and Milling

37 Replies
5122 Views
Last post October 12, 2011, 07:22:45 PM
by zopi
xx
OOPS

Started by sawman on Sawmills and Milling

39 Replies
7300 Views
Last post December 31, 2003, 02:46:04 PM
by Wes
xx
oops!

Started by Den Socling on General Board

14 Replies
791 Views
Last post April 03, 2014, 10:48:44 AM
by Raider Bill
xx
oops!

Started by woodmills1 on General Board

6 Replies
1486 Views
Last post January 21, 2010, 06:15:31 PM
by woodmills1
 


Powered by EzPortal