iDRY Vacuum Kilns

Sponsors:

A Whazit, yet again

Started by SwampDonkey, November 12, 2007, 09:25:20 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

SwampDonkey



Some kind of 3D surface map?  :D :D :D
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

Left Coast Chris

What Woodbowl is steppin in?? :-\
Home built cantilever head, 24 HP honda mill, Case 580D, MF 135 and one Squirel Dog Jack Russel Mix -- Crickett

SwampDonkey

Sniff, sniff.......nope no steam or odor there.  ;D
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

tonich

Looks like a Pine bark to me…  smiley_headscratch

metalspinner

I do what the little voices in my wife's head tell me to do.

SwampDonkey

Ok here is the outter surface, the flip-side of the subject.


"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

SwampDonkey

In the first photo those 'contours' are not beetle galleries.
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

Paul_H

Is it part of an old Relic from the west coast of BC?

Science isn't meant to be trusted it's to be tested

SwampDonkey

 :D :D :D :D


No, not quite so far away.  ;D
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

woodbeard

Maybe closer to the beech, then?
???

sprucebunny

MS193, MS192 and an 026  Weeding and Thinning. Gilbert Champion sawmill

SwampDonkey

Look to the right-hand third of the last picture. I made sure that section was in the photo for a clue.
;D




Here is the whole picture. I picked it up off the ground. It fell from a living tree, a very much alive tree, not a dead branch on it. ;D

Size ~ 17 inches long and 11 inches wide. Couldn't get her all on the scanner.
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

woodbeard


SwampDonkey

"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

Thank You Sponsors!