The Forestry Forum is sponsored in part by:

iDRY Vacuum Kilns


Forestry Forum
Sponsored by:


TimberKing Sawmills



Toll Free 1-800-582-0470

LogRite Tools



Norwood Industries Inc.


Sawmill & Woodlot Magazine



Your source for Portable Sawmills, Edgers, Resaws, Sharpeners, Setters, Bandsaw Blades and Sawmill Parts

EZ Boardwalk Sawmills. More Saw For Less Money!

STIHLDealers.com sponsored by Northeast STIHL


Woodland Sawmills

Peterson Swingmills

 KASCO SharpTech WoodMaxx Blades

Turbosawmill

Sawmill Exchange

Michigan Firewood, your BRUTE FORCE Authorized Dealer

FARMA


Council Tool

Baker Products

ECHO-Bearcat

iDRY Wood Lumber Vacuum Drying for everyon

Baltic Abrasives Technologies




Author Topic: Woodland HM 126 vs Harbor Freight sawmill  (Read 44199 times)

0 Members and 1 Guest are viewing this topic.

Offline Shaggy

  • member
  • *
  • Posts: 29
  • Location: South Mississippi
  • Gender: Male
    • Share Post
Woodland HM 126 vs Harbor Freight sawmill
« on: December 10, 2014, 07:47:11 PM »
I am looking at getting a sawmill and only need a small cheap mill to cut enough wood to build a house, barn and small animal housing/structures (troughs etc)... So of course I am looking at the cheaper mills like the woodland and the Harbor Freight's version. I know that the HF is a cheap knock off but is the woodlands worth $1000 more ????
Does the Woodlands cut bigger logs? is the cut better? I have seen posts on the HF saying the head moved while cutting so the boards were wavy or changed thickness. Is the clamping/locking better.... or can/is there easy fixes   for that and I can save 1K? What about adding track to cut up to 16 ft ? I can't find HF selling track so has anyone made track to lengthen log length you can cut? I can buy the HF now but would need another 6-8 months to save up to get the Woodland... (any and all help would be great)(tell me any good AND BAD about either if you have or used em.... THANXZ

Offline WDH

  • Forester
  • Administrator
  • *****
  • Posts: 27880
  • Age: 65
  • Location: Perry, GA
  • Gender: Male
  • April 1998 - August 2008
    • Share Post
    • hamsleyhardwood.com
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #1 on: December 10, 2014, 07:52:28 PM »
There are no free rides.  There are a number of satisfied Woodland Mills owners on here.  Logs are heavy and rough and tear things up.  The re-sale value should also be taken into account.
Woodmizer LT40HDD35, John Deere 2155, Kubota M5640SU, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

Offline wilcox_11

  • member
  • *
  • Posts: 11
  • Location: Presque Isle Maine
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #2 on: December 10, 2014, 08:18:20 PM »
HF mill is $2000 and the woodland is $2900. Have no experience with either. The woodland looks better built in my opinion.

Offline goose63

  • Senior Member x2
  • *****
  • Posts: 2334
  • Age: 68
  • Location: Hankinson North Dakota
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #3 on: December 10, 2014, 08:44:46 PM »
I have the woodland bought the extra extension can cut 16 foot log built a trailer for it. its a tough little mill  am real happy with it I think its a better mill than the H F 

  

  I have cut some big logs on it
goose
if you find your self in a deep hole stop digging
saw logs all day what do you get lots of lumber and a day older
thank you to all the vets

Offline Shaggy

  • member
  • *
  • Posts: 29
  • Location: South Mississippi
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #4 on: December 10, 2014, 09:08:22 PM »

so all the woodland ppl, is the cuts wavy or how thin have you cut? any 1/2 in. boards or even 1/4 in?

Offline Shaggy

  • member
  • *
  • Posts: 29
  • Location: South Mississippi
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #5 on: December 10, 2014, 09:12:04 PM »
HF mill is $2000 and the woodland is $2900. Have no experience with either. The woodland looks better built in my opinion.
Your right, i meant to say save 1000 and was thinking of the woodland price of 3k, sorry for the misprint ya'll, I'll fix the original post....

Offline Dave H.

  • Full Member x2
  • ***
  • Posts: 138
  • Age: 46
  • Location: Ludowici Ga
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #6 on: December 10, 2014, 09:30:43 PM »
I own a woodland mill. I looked at both for a while before decideing. from what ive seen the HF mill will need upgrades right out of the box(about $200).bed system is very light duty(I don't know of being able to by extentions so they might have to be fabricated?)also the big point for me was dealer support.hf has basically zero.shipping is also something to be considered.woodland mills does front door delivery(includes off the truck service)HF ,I believe that's extra or you will have to figure out how to get it out of the back of a semi.in my opinion the extra cost is money well spent.
as far as cutting ive had very little issues(most being operator issues)ive also cut several 1/8 slices(for fun) with no problems.

Offline reswire

  • Senior Member
  • ****
  • Posts: 439
  • Age: 60
  • Location: Currently under a pile of sawdust...
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #7 on: December 10, 2014, 09:32:56 PM »
That Woodland mill looks pretty impressive, but cutting enough lumber for all the tasks you have listed will be no easy job.  Remember support equipment, how you'll find and move the logs, and where you will set them to dry, (additional time and money), all add up.  I'm sure you can accomplish your goal, but it may be more to cutting  out lumber for your home than you imagine. :)  I'm just saying the mill might not be the only cost you'll encounter.
LT 40HDG 35, JD 5205, some Stihl saws, 15 goats, 10 chickens, 3 Chessies and a Weiner dog...

Offline jwcracker

  • Member*
  • *
  • Posts: 1
  • Location: Cottondale, Florida
  • Gender: Male
  • "Get R Done"
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #8 on: December 10, 2014, 10:34:22 PM »
I have enjoyed my Woodland Mill HM 126.  The key to this mill is to keep a sharp blade, a tight drive belt, and don't flood the blade with lubricant or the blade will jump off.  My Woodland Mill does great on pines (that we have plenty of around here).  Hardwoods challenge it.

Offline Sawyer4fun

  • member
  • *
  • Posts: 22
  • Age: 58
  • Location: Ottawa, Ontario
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #9 on: December 10, 2014, 10:41:00 PM »
Hi, I also have the HM126 and am very happy with it.  I have not had any issues with the head dropping, the head locks with both the cams on the legs as well as the crank itself.  Properly adjusted it holds solid throughout the cut.

One major thing with Woodland Mills is the customer service, it is way above average and they are extremely easy to deal with.
Woodland Mills HM126, grew up visiting my Grandfather's mill and always loved the smell of sawdust :)

Offline StimW

  • Senior Member
  • ****
  • Posts: 252
  • Age: 70
  • Location: NE Florida
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #10 on: December 10, 2014, 10:57:29 PM »
I know Woodland is a sponsor and I don't like to go against someone who is paying the way, But.
I have had the HF since last spring and am very happy for the money that I paid.
It was on sale for $1900. , I used a 25% off coupon (if you can't find one google for it)  and with shipping and sales tax it was $1607. to my driveway.
It comes with a 10 hp Honda knock-off motor (Preditor HF Chinese Brand)  and will cut 9' 6"" boards, is packed very well.
I mounted it to a frame with a removable axle and added an extension so I can cut 16' boards.
If you check my gallery pics (click on the little camera to the left) you can see it from the crate to assembled and cutting.
I did have some problems with a oak log and it cutting wavy but the oak is like cutting iron! I gave scraps to  friend for firewood and he can't even split it with a wedge!
I since have been cutting pine with great results.



  

    
New HF Band Mill
Branson 35 hp 4 WD Diesel Tractor W/Attachments- Backhoe, FEL W/ Bucket or Forks, 4' Tiller
4000# Clark Forklift W/24" Tires
Promark 6" Brush chipper W/18 hp Kohler

Offline mikeb1079

  • Senior Member
  • ****
  • Posts: 819
  • Age: 40
  • Location: madison, wi
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #11 on: December 10, 2014, 11:34:56 PM »
i've run the woodland mill but not the hf mill but even looking at stim's pic i can tell you the woodland is way better built.  we cut cherry at my buddys property all day and the woodland mill was flawless.  i was impressed.  get the woodland, it'll have more resale when you decide to buy a superhydraulic anyways.
 :D :D
that's why you must play di drum...to blow the big guys mind!
homebuilt 16hp mill
99 wm superhydraulic w/42hp kubota

Offline goose63

  • Senior Member x2
  • *****
  • Posts: 2334
  • Age: 68
  • Location: Hankinson North Dakota
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #12 on: December 11, 2014, 01:32:27 PM »

so all the woodland ppl, is the cuts wavy or how thin have you cut? any 1/2 in. boards or even 1/4 in?
Shaggy mine  don't get wavy keep a sharp blade on and it will cut good

  and this thin if you want had to dig this out of the burn pile was 10 inch by 8 ft
goose
if you find your self in a deep hole stop digging
saw logs all day what do you get lots of lumber and a day older
thank you to all the vets

Offline shawnr

  • member
  • *
  • Posts: 25
  • Location: Patterson, NY
  • Gender: Male
  • Born a century too late!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #13 on: December 11, 2014, 02:05:23 PM »
I really liked the looks of the WM, but I just got a 25% off coupon from HF (friends and family discount).  I'm not a friend or family but the coupon can be used by anyone and is good through Sunday.  Let me know if you want it and I'll email to you.
Kioti CK30 TLB, lots of Stihl Chain saws, 1956 Chevy, and now a Oscar 18CE to make sawdust with

Kind Regards,
Shawn

Offline RM Farm

  • Full Member
  • **
  • Posts: 66
  • Age: 53
  • Location: Midlands, South Carolina
  • Gender: Male
  • Having Fun!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #14 on: December 11, 2014, 02:26:22 PM »
I own the Woodland Mills. This is a great saw for what you are wanting to do. I do believe you can make money with it, but as someone else stated, logs are heavy and they shake things up a bit.  For what I use mine for it's great (hobby sawing), and I have not had any wavy cuts. Hope this helps. :)
Thanks, Robert

Woodland Mills HM126; Kubota L3200 with FEL, quick attach forks.

Offline nrp0450

  • Full Member
  • **
  • Posts: 63
  • Age: 39
  • Location: Tyler, TX
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #15 on: December 11, 2014, 03:06:33 PM »
I have the Woodland Mills too. I've been very happy with it and happy with the customer service until they messed up an order I placed for guide bearings. Their mistake put the mill out of service for 3 weeks. The bearings are supposed to come in tomorrow!

To cut longer logs I went to our local steel plant and bought two 20' steel angle pieces of the same dimensions as the track that came with the mill. I drilled holes in it and moved the bunks to it. I can cut 18' with that setup. And when I need to, I mount the old track to one end to cut even longer.
Woodland Mills HM126 sawmill
Husky 450 and Stihl MS250 chainsaws
Foley Belsaw 985 planer/molder
Kubota M4700 tractor

Offline John357

  • member
  • *
  • Posts: 31
  • Location: Raleigh, NC
  • Hello!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #16 on: December 11, 2014, 05:20:34 PM »
Hi Shaggy,

I have the Woodland Mill and have had wavy cuts.  I thought it was from sawing small diameter logs (branches!) as the wave tended to follow where a branch was.  Now I think it was from pushing through too fast.  I have since done several branches and with a real slow cut, can get straight boards. 

I picked the Woodland because it was a little more expensive than the HF, assuming I'd get little thicker steel, better cables, etc.   I also liked the video's demonstrating all the design features such as lowered hand crank (from an earlier WM model) track sweepers, and now they ship with adjustable feet. 

I'll second the comments about log handling.  I have a stationary setup, and thought I'd be able to handle 8' logs, but even those are pretty hard to move around without dedicated machinery.  Just something to keep in mind.

John
Woodland Mills HM126

Offline Ga Mtn Man

  • Senior Member x2
  • *****
  • Posts: 2124
  • Age: 56
  • Location: North Georgia Mountains
  • Gender: Male
  • Y'all can call me GMM
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #17 on: December 11, 2014, 05:27:33 PM »
I really liked the looks of the WM, but I just got a 25% off coupon from HF (friends and family discount).  I'm not a friend or family but the coupon can be used by anyone and is good through Sunday.  Let me know if you want it and I'll email to you.

Better read the fine print on that coupon.  High priced items like sawmills are often excluded from those big discount coupons. :-\
"If the women don't find you handsome they should at least find you handy." - Red Green


2012 LT40HDG29 with "Superized" hydraulics,  2 Logrite cant hooks, home-built log arch.

Offline StimW

  • Senior Member
  • ****
  • Posts: 252
  • Age: 70
  • Location: NE Florida
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #18 on: December 11, 2014, 06:10:18 PM »
I really liked the looks of the WM, but I just got a 25% off coupon from HF (friends and family discount).  I'm not a friend or family but the coupon can be used by anyone and is good through Sunday.  Let me know if you want it and I'll email to you.

Better read the fine print on that coupon.  High priced items like sawmills are often excluded from those big discount coupons. :-\

I was skeptical about the coupon but they did honor it for my mill.
New HF Band Mill
Branson 35 hp 4 WD Diesel Tractor W/Attachments- Backhoe, FEL W/ Bucket or Forks, 4' Tiller
4000# Clark Forklift W/24" Tires
Promark 6" Brush chipper W/18 hp Kohler

Offline StimW

  • Senior Member
  • ****
  • Posts: 252
  • Age: 70
  • Location: NE Florida
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #19 on: December 11, 2014, 06:23:12 PM »
The big log on the right is on the mill.

 

 


I added more pics today. I have this cant on the mill now trying to decide what to cut next. ??
The slab on the ground I am going to stand up and cut into 2 X 4's , cant and slab are 16' 4"" long.

 

  

 
New HF Band Mill
Branson 35 hp 4 WD Diesel Tractor W/Attachments- Backhoe, FEL W/ Bucket or Forks, 4' Tiller
4000# Clark Forklift W/24" Tires
Promark 6" Brush chipper W/18 hp Kohler

Offline hunterbuild

  • Full Member
  • **
  • Posts: 94
  • Location: near Keystone SD
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #20 on: December 12, 2014, 12:06:36 AM »
I have the HF mill for a couple of years now. have cut a lot of logs with it. I did have to do some fixing, but nothing any one couldn't handle ( see my earlier post on this). The 20% coupon works for the saw. Mine was about $1700 delivered to my door. Not much for customer service is true. I found two pieces of angle 20ft long and made a new track to cut 18'. If I had it to do over I would do it again. It paid for its self in first job I used it for. I've sawed 20"plus Oak with it, but mostly am cutting pine. It will cut 22"     

Offline Shaggy

  • member
  • *
  • Posts: 29
  • Location: South Mississippi
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #21 on: December 12, 2014, 12:09:07 AM »
I guess I should have said that I've done logging and I have an ol'e Farmall 130 tractor and a Stihl saw... I know it can pull the logs I want out of my woods as we used her back when a little storm called Katrena hit the land mass between New Orleans and Mobile. (yes we still remember that weather channel) The only oak I couldn't move with the Farmall was a huge water oak that was over 6' in diameter... (that was the same tree that turned a mudbog truck w/ 44's tires to a GMC that was less than 6" tall once that tree centered her :'( ) The branches were   almost 3' in diameter n were 60' up (when the tree was still alive)... But I couldn't cut her up w/ even a 24" stihl 066 saw.... made me sick to watch all that wood just rot in what used to be my driveway... and NO  ONE w/ a mill would even look at my wood as ppl w/ 100's to thousands of acres took them away

But I digress, I will build the barn first to house the mill and the dried lumber and use an old greenhouse to be a solar kiln. I have only hardwood on my land though and I'm still leaning towards the woodland, but I got the money for the HF now n I want to see sawdust flyin.... but reason says to get the better built n go with the Woodland. its just hard to know I could be milling now but I gotta wait 2-3 more months to get it instead of the HF now...(I think the bug has bitten me ya'll LOL)

Offline nomad

  • Senior Member x2
  • *****
  • Posts: 1944
  • Age: 63
  • Location: Jacksonville, Fl
  • Gender: Male
  • Member
    • Share Post
    • Bill's Mill Portable Sawmill Service
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #22 on: December 12, 2014, 07:44:19 AM »
     Shaggy, have you considered looking into a used mill?  Maybe you could get your "fix" upgraded and still save some coin.
Buying a hammer doesn't make you a carpenter
WoodMizer LT50HDD51-WR
Lucas 1030 w/slabbing attachment

Offline pidaster

  • member
  • *
  • Posts: 16
  • Age: 37
  • Location: Petal, MS
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #23 on: December 28, 2014, 10:03:41 PM »
Shaggy, I sent you an email earlier. I caught the HF mill on sale and used a 25% coupon on it, I think I paid $1500 plus tax. I've recently read that they will no longer accept coupons on the sawmill and have noticed the fine print to include that it is not accepted on them as well.
If you are close to Hattiesburg I might can meet you somewhere or bring it over to you so you can look at it if you haven't purchased one yet.

Offline Magicman

  • Senior Member x2
  • *****
  • Posts: 37125
  • Age: 75
  • Location: Brookhaven, MS
  • Gender: Male
  • A "Traveling Man"
    • Share Post
    • Knothole Sawmill
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #24 on: December 28, 2014, 10:09:50 PM »
Welcome to the Forestry Forum, pidaster.
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

Offline pidaster

  • member
  • *
  • Posts: 16
  • Age: 37
  • Location: Petal, MS
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #25 on: December 28, 2014, 10:19:10 PM »
Thanks, Magicman!
Glad to see more users from my area!

Offline fishfighter

  • Senior Member x2
  • *****
  • Posts: 2872
  • Location: Ventress, Louisiana
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #26 on: January 23, 2015, 07:29:35 PM »
I look at both. The more I looked at the HF, the more spending 1K for a Woodland HM126 would be better spent.

If one looks real close at the HF and compare with the 126, one will see what the big difference is.

Now only if Woodland would push my mill to me that I ordered yesterday.

Oh, those coupons for HF exclude sawmills, I called them.

Offline HaroldSiefke

  • Full Member
  • **
  • Posts: 98
  • Age: 43
  • Location: Montana
  • Gender: Male
  • I'm not so new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #27 on: January 23, 2015, 07:58:05 PM »
I bought a hm126 and when I got it it had a band wheel that had the hole to big for bearing. So I called Neil and my band wheel was sent the next day. Try that kind of support with harbor freight. Stick with some one that you can get support from. The people one the side are are friends so we all should stick together. Good luck in your choice ... Hal
Harold

Offline Swatson

  • Full Member x2
  • ***
  • Posts: 168
  • Age: 45
  • Location: Hindsville, Arkansas
  • Gender: Male
  • Arkansas born and raised
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #28 on: January 23, 2015, 10:00:59 PM »
I would agree with Harold.  HF has poor customer service and its a failure from the top.  My wife worked there for six months while she was in between management jobs.  She tried to order some replacement pulleys for my lathe and even she couldn't get them.  They have no standard process for getting spare parts.  She was frustrated as she could be trying to take care of folks.  Finally she found a job in her field.     
I cant figure out which one I like better: working with wood or making the tools to work with wood.

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #29 on: November 12, 2015, 11:04:04 AM »
I realize I'm reviving an old thread from the dead but I'm now in the same situation as shaggy. Instead of making a brand new thread about the same thing I was actually wanting to get with the guys close to me(shaggy and pidaster) and see if I can check out their mills. What say you gentlemen?
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline Kingmt

  • Senior Member
  • ****
  • Posts: 296
  • Location: WV
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #30 on: November 12, 2015, 01:01:38 PM »
Hi dukecrazy.

I didn't read the whole thread yet since I seen it was old but wanted to say hi & let you know you can PM me any questions. If we were closer if let you cut some boards. The screws in my HF mill have a fancy W on the head I figured might stand for Woodland.

I have a thread with some of the mods I've done on mine & was able to keep the cost down. I've been really happy with it.
Sawmill=Harbor Freight Item#62366
Chainsaws=MS180CBE(14"), MS290(18"), MS038(20"), MS660(20" & 36")
Staff=1Wife & 5 Kids :)
Please excuse my typing. I don't do well at catching auto correct.

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #31 on: November 12, 2015, 01:41:12 PM »
kingmt,
 
     I appreciate the response sir and were you closer, I would definitely take you up on your offer. As it stands, I'd like to get with one of these local fellas and check out their rig before I purchase. I've been researching and eyeing the cheaper entry level mills for a little while now and am antsy to pull the trigger on one. Although I don't want to spend the extra grand on the woodland it may be a good option. As I sit and look at pictures of the HF and Woodland side by side it really is hard to tell a difference in them. Also, from the videos of each in action it becomes EVEN HARDER to justify the $1000 extra for the woodland as the central machinery rig cuts very well.


Off topic: is there an area with introductions? I looked around but didn't see a specific area to introduce ourselves.
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline beenthere

  • Senior Member x2
  • *****
  • Posts: 26932
  • Location: Southern Wisconsin, USA
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #32 on: November 12, 2015, 03:13:42 PM »
duke
Quote
Off topic: is there an area with introductions? I looked around but didn't see a specific area to introduce ourselves.

Go to the General forum on the Home page and start a new thread to introduce "dukecrazy". We'll gladly listen, and welcome to the Forestry Forum.
south central Wisconsin
 It may be that my sole purpose in life is simply to serve as a warning to others

Offline Kingmt

  • Senior Member
  • ****
  • Posts: 296
  • Location: WV
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #33 on: November 12, 2015, 04:15:48 PM »
I own a HF & looking at the pictures other then paint I can't tell them apart. I did replace my track so I could cut a 16'+ log & ended up with 3" more top clearance which 3" made a big difference on those oblong butt logs. Surprising how many more logs almost fit that so now & I get a extra board out of a log sometimes. I'm going to sale my old track as soon as I finish building my new bunks.
Sawmill=Harbor Freight Item#62366
Chainsaws=MS180CBE(14"), MS290(18"), MS038(20"), MS660(20" & 36")
Staff=1Wife & 5 Kids :)
Please excuse my typing. I don't do well at catching auto correct.

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #34 on: November 12, 2015, 04:56:28 PM »
I own a HF & looking at the pictures other then paint I can't tell them apart. I did replace my track so I could cut a 16'+ log & ended up with 3" more top clearance which 3" made a big difference on those oblong butt logs. Surprising how many more logs almost fit that so now & I get a extra board out of a log sometimes. I'm going to sale my old track as soon as I finish building my new bunks.

would you mind posting a picture of your upgrade to the track? I'd like to see it bc it may be something I do.
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline Kingmt

  • Senior Member
  • ****
  • Posts: 296
  • Location: WV
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #35 on: November 12, 2015, 05:13:42 PM »
I can't because of the way I do things & the rules on here but when I get a picture taken I'll PM you a link.
Sawmill=Harbor Freight Item#62366
Chainsaws=MS180CBE(14"), MS290(18"), MS038(20"), MS660(20" & 36")
Staff=1Wife & 5 Kids :)
Please excuse my typing. I don't do well at catching auto correct.

Offline beenthere

  • Senior Member x2
  • *****
  • Posts: 26932
  • Location: Southern Wisconsin, USA
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #36 on: November 12, 2015, 06:03:44 PM »
But you do enjoy other members' pics... 
south central Wisconsin
 It may be that my sole purpose in life is simply to serve as a warning to others

Offline Jeff

  • Fearless Leader
  • Administrator
  • *****
  • Posts: 47136
  • Age: 57
  • Location: Harrison MI
  • Gender: Male
  • I know that I do not know.
    • Share Post
    • THEE Forestry Forum
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #37 on: November 12, 2015, 06:45:53 PM »
smiley_thumbsup
Just call me the midget doctor.
Forestry Forum Founder and Chief Bottle Washer.

Commercial circle sawmill sawyer in a past life.

Offline bkaimwood

  • Senior Member
  • ****
  • Posts: 892
  • Location: Lower Northeastern PA
  • Gender: Male
  • Life's too short to sweat the small stuff
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #38 on: November 12, 2015, 07:04:25 PM »
I would spend the extra $ for the woodland, without any hesitation or pondering... Just sayin'...
bk

Offline Kingmt

  • Senior Member
  • ****
  • Posts: 296
  • Location: WV
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #39 on: November 12, 2015, 08:26:10 PM »
But you do enjoy other members' pics... 
Yes I do. I also respect the rules of the forum. 😉
Sawmill=Harbor Freight Item#62366
Chainsaws=MS180CBE(14"), MS290(18"), MS038(20"), MS660(20" & 36")
Staff=1Wife & 5 Kids :)
Please excuse my typing. I don't do well at catching auto correct.

Offline Jeff

  • Fearless Leader
  • Administrator
  • *****
  • Posts: 47136
  • Age: 57
  • Location: Harrison MI
  • Gender: Male
  • I know that I do not know.
    • Share Post
    • THEE Forestry Forum
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #40 on: November 12, 2015, 09:33:50 PM »
Which translates two ways...

1. I can't figure out how to do it

or most likely
2. I totally DO NOT respect the rules for sharing photos here and the rules pertaining to that, so choose not to

Either way, okay by me, but the answer to beenthere is pure bull puckey.
Just call me the midget doctor.
Forestry Forum Founder and Chief Bottle Washer.

Commercial circle sawmill sawyer in a past life.

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #41 on: November 12, 2015, 11:37:56 PM »
I can't because of the way I do things & the rules on here but when I get a picture taken I'll PM you a link.

That's fine, just PM me. 
 I don't get the rules thing I keep seeing, the way I read them the rules didn't come across in a way where you can't post pics of your setup that you modified?  Maybe I just didn't understand them, lol
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline sawmilljoe

  • Full Member
  • **
  • Posts: 82
  • Age: 46
  • Location: Nova Scotia Canada
  • Gender: Male
  • ill try sawing anything once
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #42 on: November 13, 2015, 05:48:25 AM »
I too own the Woodland. There customer service I great. The mill was been doing great in a small scale sawing business for about 8 months now. I saw on weekend and some evenings as this is a new business not even one. The lumber coming off the mill is great if you do 3 things keep a sharp and well set blade on the mill (do not think about just one more log change it ) , lots of tension on the blade (35 ftlbs on the nut with a torque wrench it will be more then you think) and last but not least speed the old saying speed kills with the smaller mills this is so true. Welcome to the group and get sawing any mill is a good mill.

PS the engine on the woodland is a great little engine and there is a lot of you extra cost plus the changes in the dogging and crank systems make it great.

Offline Kingmt

  • Senior Member
  • ****
  • Posts: 296
  • Location: WV
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #43 on: November 13, 2015, 07:21:47 AM »
Jeff, I really don't understand how you interrupt it that way. You have rules to your forum. It is your house & I respect that. I never asked you to allow me to do something different or expect you to.

My answer to beenthere at first was just "Yes I do" but I was concerned that short response would be taken wrong. I'm not sure why he asked it to start with since I never said anything negative. I was only responding to a request that I wouldn't be doing.

As far as pictures go. I've explained before. First I don't take many pictures but those that I do are backed up to my cloud & only when I'm connected to WiFi & they take forever because of the speed of my connection. When I'm on cellular data I'm limited to 1.5GB between my wife & I for the month. That isn't very much & is hard to stay under that limit.

Sorry that my choice not to upload pictures to your server offends you. It just isn't efficient for me. I do really enjoy this from & while I don't have much experience I enjoy offering what knowledge I do have. However if you don't want me to I'll remain silent.
Sawmill=Harbor Freight Item#62366
Chainsaws=MS180CBE(14"), MS290(18"), MS038(20"), MS660(20" & 36")
Staff=1Wife & 5 Kids :)
Please excuse my typing. I don't do well at catching auto correct.

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #44 on: November 13, 2015, 08:20:53 AM »
thanks for the advice sawmilljoe, believe it or not, I will definitely remember it!

kingmt, you know better than I that this forum is a great and respectful place so don't take stuff too offensively bc I'm sure it isn't meant in a harmful manner.
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline Jeff

  • Fearless Leader
  • Administrator
  • *****
  • Posts: 47136
  • Age: 57
  • Location: Harrison MI
  • Gender: Male
  • I know that I do not know.
    • Share Post
    • THEE Forestry Forum
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #45 on: November 13, 2015, 08:42:35 AM »
Kingmt, BS!! on  THREE recent and separate occasions you have brought up that you don't post photos due to our rules. The first time you felt the need to butt in where someone else was having an issue to proclaim this. I'm not offended about your not wanting to share photos. I could care less if I ever see one of your photos. What pisses me off is that if you don't want to share photos under our rules, just don't and shut up about it.
Just call me the midget doctor.
Forestry Forum Founder and Chief Bottle Washer.

Commercial circle sawmill sawyer in a past life.

Offline Kingmt

  • Senior Member
  • ****
  • Posts: 296
  • Location: WV
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #46 on: November 13, 2015, 09:00:02 AM »
Well I don't BS. I try to be quite respectful about things even when I feel others are not.
Sawmill=Harbor Freight Item#62366
Chainsaws=MS180CBE(14"), MS290(18"), MS038(20"), MS660(20" & 36")
Staff=1Wife & 5 Kids :)
Please excuse my typing. I don't do well at catching auto correct.

Offline beenthere

  • Senior Member x2
  • *****
  • Posts: 26932
  • Location: Southern Wisconsin, USA
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #47 on: November 13, 2015, 12:18:54 PM »
I recall reading this quote somewhere...   ;)

Quote
No pictures=didn't happen.

http://www.backyardchickens.com/forums/posts/by_user/id/30014/page/50
south central Wisconsin
 It may be that my sole purpose in life is simply to serve as a warning to others

Offline Kingmt

  • Senior Member
  • ****
  • Posts: 296
  • Location: WV
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #48 on: November 13, 2015, 12:27:40 PM »
I take it you've checked up on me to see if I'm a trouble maker. 😉 I do the same thing with people to get a better feel for who I'm talking to at times. You can also find me at androidarea51.com along with a few other sites.

I wanted to add some info on the bearings. The track rollers use 6004RS. I believe if you pop the seals & add grease you won't have any problems out of them. Time will tell.

I use mostly water to lube the blade so if your using something else you might not see the same problems with them.
Sawmill=Harbor Freight Item#62366
Chainsaws=MS180CBE(14"), MS290(18"), MS038(20"), MS660(20" & 36")
Staff=1Wife & 5 Kids :)
Please excuse my typing. I don't do well at catching auto correct.

Offline btulloh

  • Senior Member x2
  • *****
  • Posts: 1323
  • Age: 66
  • Location: Midlothian, VA
  • Gender: Male
  • I never met an air conditioner I didn't like
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #49 on: November 13, 2015, 06:23:30 PM »
an order I placed for guide bearings. Their mistake put the mill out of service for 3 weeks. The bearings are supposed to come in tomorrow!

These bearings are easy to find locally or from a domestic source.  The WM service is great, but they have to ship parts from Canada so it makes it a little more involve, expensive and slower.  All of the bearings are pretty common, especially the guide bearings.  I bought 10 the other day for $15, not that I go through that many.  Drive belt also.  Better to get locally or domestic at least just because of the shipping.  (I hope that's OK with Neil.)

When I did need a couple of little things replaced that were not made quite right they got them out right away with no fuss.  Great service.
HM126

Offline pidaster

  • member
  • *
  • Posts: 16
  • Age: 37
  • Location: Petal, MS
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #50 on: November 14, 2015, 08:55:14 AM »
I realize I'm reviving an old thread from the dead but I'm now in the same situation as shaggy. Instead of making a brand new thread about the same thing I was actually wanting to get with the guys close to me(shaggy and pidaster) and see if I can check out their mills. What say you gentlemen?

You're more than welcome to come put your eyes on the mill. I may not have anything to run through it at the time but at least you could see what it looks like in person. There were a few things about the mill that needed some attention but for $1600 I'm perfectly happy. If I had access to a Woodland Mill then I could honestly tell you if it's worth it or not. Since I only saw maybe once a month, this will do. Maybe one day when I'm able to saw more and can justify the cost, I'll get a Woodmizer.

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #51 on: November 14, 2015, 11:54:57 AM »
I'd love to come by today even though I know is short notice. If not today, maybe tomorrow?
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #52 on: November 14, 2015, 03:46:57 PM »
It was great getting to meet you pidaster. I gained a good bit of knowledge about the mill just from seeing yours today.  Thanks again. 
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline seadawg

  • member
  • *
  • Posts: 2
  • Age: 50
  • Location: Bainbridge,New York
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #53 on: November 14, 2015, 04:18:46 PM »
I have a harbor freight mill and love it. I just wish my health would let me use it more.

Offline pidaster

  • member
  • *
  • Posts: 16
  • Age: 37
  • Location: Petal, MS
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #54 on: November 15, 2015, 08:19:49 AM »
It was great getting to meet you pidaster. I gained a good bit of knowledge about the mill just from seeing yours today.  Thanks again.
Ditto on the meeting. If you have any questions or need some pictures, just let me know.

Offline breederman

  • Senior Member x2
  • *****
  • Posts: 1222
  • Age: 60
  • Location: Unadilla, upstate New York
  • Gender: Male
  • getting by the best way I know how
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #55 on: November 15, 2015, 08:41:56 AM »
Welcome to the forum seadawg ! A couple of us live very close to Bainbridge .
Together we got this !

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #56 on: November 22, 2015, 12:13:21 AM »
For you guys with the HF mill, have you given thought to upgrading to the 13hp engine at HF? I was in the store tonight shopping for some woodworking items and I walked over and eyeballed the two engines (the 301cc and 420cc) side by side and they look identical with the exception of the 420cc having a key start. It would stand to reason that it would be a direct replacement upgrade for us and at $359 I'm considering it. What are ya'lls thoughts on it?
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline KirkD

  • Senior Member
  • ****
  • Posts: 265
  • Age: 61
  • Location: Pleasant Hill and Crescent, Oregon
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #57 on: November 23, 2015, 12:17:30 PM »
Are they the same shaft sizes as the motor that comes on it? If not you will have to change clutches.
Wood-mizer LT40HD-G24 Year 1989

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #58 on: November 24, 2015, 10:44:49 AM »
I haven't checked out full specs yet to find out but I'm about to go to the site and find out bc I got an email that the engine I want is on sale for 299 which is hard to pass up. 
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #59 on: November 24, 2015, 01:00:17 PM »
PTO shaft diameter, length, height, keyway on the two engines are both the exact same, however, the difference is the shaft end tapped which on the 420cc it's 3/8" 24UNF and on 301cc it's 7/16" 20UNF.
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline nomad

  • Senior Member x2
  • *****
  • Posts: 1944
  • Age: 63
  • Location: Jacksonville, Fl
  • Gender: Male
  • Member
    • Share Post
    • Bill's Mill Portable Sawmill Service
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #60 on: November 24, 2015, 06:32:49 PM »
PTO shaft diameter, length, height, keyway on the two engines are both the exact same, however, the difference is the shaft end tapped which on the 420cc it's 3/8" 24UNF and on 301cc it's 7/16" 20UNF.
That makes no sense at all.  The bigger engine uses a smaller connection?
Buying a hammer doesn't make you a carpenter
WoodMizer LT50HDD51-WR
Lucas 1030 w/slabbing attachment

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #61 on: November 24, 2015, 08:42:31 PM »
that's what the specs say, lol.
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline KirkD

  • Senior Member
  • ****
  • Posts: 265
  • Age: 61
  • Location: Pleasant Hill and Crescent, Oregon
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #62 on: November 25, 2015, 12:07:44 PM »
With HF I would question it I bet you will find out it is metric.
Wood-mizer LT40HD-G24 Year 1989

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #63 on: November 25, 2015, 08:29:22 PM »
I wonder how hard it would be to find a new clutch to fit if the one I have won't fit the new engine....hmmm
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline Kbeitz

  • Senior Member x2
  • *****
  • Posts: 6954
  • Age: 66
  • Location: Millville, Pa.
  • Gender: Male
  • Never enough time...
    • Share Post
    • My Hobbies
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #64 on: November 25, 2015, 09:16:13 PM »
You can buy bushings for smaller shafts.
Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #65 on: November 25, 2015, 09:47:50 PM »
Will definitely do that then!  For 300+bushings to double my power seems like a no brainer
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline starmac

  • Senior Member x2
  • *****
  • Posts: 2443
  • Location: Fairbanks Ak.
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #66 on: November 26, 2015, 12:44:25 AM »
It would probably be easy enough to drill and tap the shaft if it was needed.
Old LT40HD, old log truck, old MM forklift, and several huskies.

Offline dukecrazy

  • Full Member
  • **
  • Posts: 90
  • Age: 31
  • Location: Gulfport,MS
  • Gender: Male
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #67 on: November 26, 2015, 11:12:44 AM »
It seems there are a few good options on the table for it. Thanks guys
G3033 LS tractor w/FEL, multiple chainsaws, and Central machinery sawmill.

Offline DelawhereJoe

  • Senior Member x2
  • *****
  • Posts: 1007
  • Age: 38
  • Location: delaware
  • Gender: Male
  • Trapped in Delawhere
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #68 on: January 06, 2019, 05:56:19 PM »
Dragging this up from the depths, are any of the original posters out there and are you mills still up and running ?
WD-40, DUCT TAPE, 024, 026, 362c-m, 041, homelite xl, JD 2510

Offline StimW

  • Senior Member
  • ****
  • Posts: 252
  • Age: 70
  • Location: NE Florida
  • Gender: Male
  • I'm new!
    • Share Post
Re: Woodland HM 126 vs Harbor Freight sawmill
« Reply #69 on: January 07, 2019, 10:20:07 PM »
I still have my HF mill, it still works great.
I haven't had much time to use it because I closed my business, retired, bought 10 acres and moved 50 miles from where I was living and have been remodeling a 4 bedroom house.
I got some pine logs a year ago but they were poor quality, too many limbs but I cut them up just for fun.  :)
New HF Band Mill
Branson 35 hp 4 WD Diesel Tractor W/Attachments- Backhoe, FEL W/ Bucket or Forks, 4' Tiller
4000# Clark Forklift W/24" Tires
Promark 6" Brush chipper W/18 hp Kohler


Share via delicious Share via digg Share via facebook Share via linkedin Share via pinterest Share via reddit Share via stumble Share via tumblr Share via twitter

xx
harbor freight bandmill

Started by slabmaster on Sawmills and Milling

12 Replies
6011 Views
Last post February 10, 2011, 09:13:35 AM
by ForestMan
xx
Anybody got a harbor freight welder?

Started by brdmkr on General Board

9 Replies
6205 Views
Last post January 21, 2008, 05:24:35 PM
by buzzegray
xx
Let's talk Harbor Freight...

Started by Paschale on General Board

49 Replies
13808 Views
Last post May 25, 2015, 07:22:22 PM
by hackberry jake
xx
Harbor Freight in Maine

Started by thecfarm on General Board

30 Replies
4031 Views
Last post October 21, 2013, 11:54:05 AM
by BobInMN
 


Powered by EzPortal