iDRY Vacuum Kilns

Sponsors:

Mill builder ?

Started by dgdrls, February 26, 2017, 09:03:39 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dgdrls

Saw this add posted on the FF board under our sponsor Sawmill Exchange,

https://sawmillexchange.com/view_product/17420/

Probably just a coincidence with the same name as the folks at EZ Boardwalk?

D

paul case

Ed Zimmerman is no longer at EZ Boardwalk. Stanton Knox is the owner now. Ed told me that the Zimmerman Mfg was relation to him. Ed even had his mill info at the his booth at the shows,

That is one heavy built manual mill.

PC
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

dgdrls

I noticed Stanton name on the website,

I also found your promotion on the website,  very nice Paul.  That is you I hope?

Thanks
D

Thank You Sponsors!