iDRY Vacuum Kilns

Loose Screws

Started by Magicman, July 29, 2011, 08:16:08 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Magicman

July 29, 2011, 08:16:08 PM
My laptop has been very erratic lately and getting worse.  Constantly switching from AC to Battery power.  I shut it down, cleared plenty of counter space and got out the screwdrivers.

Quick fix.  Four of the screws on the bottom were loose.  This was causing the computer to loose electrical connection between the top and bottom sections.  Tightened everything up and now all is well.

So now it has been confirmed.  The Magicman had a loose screw.   ;D 
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

Warbird

#1
July 30, 2011, 11:25:14 AM
If it happens again, hit it with a hammer.  It'll make the screws so loose, it will no longer care.  ;)

Mooseherder

#2
July 30, 2011, 06:48:00 PM
You're now qualified to run a very large IT department. :D

clww

#3
August 31, 2011, 08:03:49 AM

So now it has been confirmed.  The Magicman had a loose screw.   ;D 
[/quote]

I've been accused of that malady more than once myself!
Many Stihl Saws-16"-60"
"Go Ask The Other Master Chief"
18-Wheeler Driver
Print
Go Up Pages1
User actions