Author Topic: Rust Reaper Website and Feedback (Read 9332 times)

Mike_P. · « **on:** October 18, 2007, 09:29:17 AM »

It seems like coming home again to see all of history that was in the Forestry Forum prior to the crash of 2007. Thanks to Jeff, Tammy and all of the admins for their hard work.

Prior to all of the Crash excitement and activity, Jeff and I had worked on changing the look and feel of the Rust Reaper website. We wanted to make our message clearer and to make it more pleasing to the eye. Please take a look and let me know what you think.

Also, anyone who has any feedback on their use of Rust Reaper, different applications, etc., that information is always welcome.

And, thanks to all of you who have purchased Rust Reaper. We appreciate your business and the support of the Forestry Forum.

Mike

Jeff · « **Reply #1 on:** October 18, 2007, 09:35:30 AM »

Mike also has a new photo gallery on his website! I did that in my spare time this week.

Look for that as your ordering your supply of Rust Reaper.

ElectricAl · « **Reply #2 on:** October 19, 2007, 07:01:49 PM »

We purchased a gallon of Rust Reaper a couple months ago because we have found it worked so good. Our 1993 WoodMizer gets plenty. Mainly on the vertical mast tubes. When ATF is used the socket head holes for the Polly slides packed full of sawdust and caused problems. With the use of Rust Reaper the socket head holes don't pack full. It really does not take very much product to make a difference. Rust Reaper spreads on its own. Just apply it in an "S" pattern up the mast tube.
We also use it in nearly every nut and bolt assembly on the property.

Try it....you'll like it

Ron Wenrich · « **Reply #3 on:** November 14, 2007, 06:42:28 PM »

I just remembered I needed to get some more.

The site looks good, and is easy to get around on. Paypal is a nice feature.

Mike_P. · « **Reply #4 on:** November 19, 2007, 12:02:38 PM »

Ron:

Thanks for the input and the order. We shipped in on Friday.

Mike

Reddog · « **Reply #5 on:** March 11, 2008, 08:34:28 PM »

Mike,
Thanks for the quick shipment.

Wally

beenthere · « **Reply #6 on:** March 12, 2008, 12:24:49 AM »

Mike
Dropped off some RReaper at several places, and have heard back from two....both said "Hey, that stuff really works!!" and one told about his experience. Good to hear. The Stihl dealer said he was buggering up a screw in a carburetor with the phillips screwdriver on a corroded bolt...then he remembered the RustReaper I left with him. Gave it a try, and short time later...turned it out with no problem. I didn't get the details of the other experience.

Mike_P. · « **Reply #7 on:** March 13, 2008, 08:33:21 AM »

Reddog: You are welcome. Thanks for the order. Please let me know how it works for you.

beenthere: I'm glad to hear that Rust Reaper is working out for your friends. The most effective advertising is when someone uses it and likes what it does.

Thanks to all for your support.

Mike

Reddog · « **Reply #8 on:** April 01, 2008, 02:24:08 PM »

Mike,
Just to let you know. I had a truck cap that the lock has been stuck on for two years. I had tried other oils. So it had been a year since I had last tried to get it unstuck. Figured when I got the RR it would be a good test. Well four days of putting RR into it and it freed up.

I have some other projects once it warms up out.

Wally

Mike_P. · « **Reply #9 on:** April 03, 2008, 04:17:54 PM »

Wally: I'm glad that it worked for you. I'm thinking, but could be wrong, that Ron Scott had a similar application.

When I first read your post yesterday, I was thinking it might be July before things warm up here in Michigan. But, today is a different matter. It's about 54 d. (F) and things are looking a little more like spring.

Thanks for getting back.

Mike

Ron Scott · « **Reply #10 on:** April 04, 2008, 07:51:58 PM »

Yes, I had the same experience on a truck cap lock. Rust Reaper freed it up.

beenthere · « **Reply #11 on:** September 13, 2009, 12:04:52 AM »

Another RR success story from tyb525.

https://forestryforum.com/board/index.php/topic,39002.0.html

Gib bolts in a planer head.

Great to learn about RR at an early age like tyb525, and not have to go without all these years.

BcWoodWorks · « **Reply #12 on:** December 05, 2009, 12:14:54 AM »

I realize this is a couple months old, and my post probably isn't relevant to the RR website...but I just had to say that Rust Reaper keeps my firearms in perfect condition. Plus I don't need to apply it half as often as I do regular gun oil.

Had a rusted solid nut/bolt at my Grandpa's house...Used about 5 drops in the threads above the nut...waited an hour; BING!

I love Rust Reaper.

D Hagens · « **Reply #13 on:** December 05, 2009, 11:45:37 AM »

Do you sell it in Canada? Do you need a rep out this way? If so drop me a line.

Brucer · « **Reply #14 on:** December 11, 2009, 12:35:02 AM »

Quote from: D Hagens on December 05, 2009, 11:45:37 AM

Do you sell it in Canada? Do you need a rep out this way? If so drop me a line.

And if you make him your Canadian rep, I'll be the first one to place an order

.

Forestry Forum
Sponsored by: