iDRY Vacuum Kilns

Sponsors:

I got the fever now!!!

Started by thecfarm, March 14, 2025, 05:24:16 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

thecfarm

I delivered some parts to a garage and saw a brand new Wallerstein 3pt winch on back of a 55 hp tractor.
never been used at all.
He said he is looking forward to wearing the paint off it.
I think he said it was a 4000 model?
I am ready to get going!!!!
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

KWood255

My Dad has a Wallenstein 3pt skidder winch. I've used it a few times on my 75hp kubota. I believe his is the 8000 model. It's impressive, works very well for selective skidding. My only complaint is the rope setup to engage the clutch. I'm sure it's fine once a guy gets the hang of it. 

I think his has about 150' of 3/8" cable. Sure easy to run out compared to the 3/4" on the skidder!

thecfarm

He did say he had to move the rope set up to the other side. 
I don't know why they did it that way.
You have to walk all the way around the tractor to engage the rope.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Woodfarmer

I've owned Farmi, Wallenstein and now Fransgard.

By far and away the Farmi is the much better winch. Then Fransgard and lastly the W.

doc henderson

Ray, I am sorry you are not feeling well.  I hope you get over the fever and can go back to pulling logs soon!   :wink_2: ffsmiley ffsmiley ffsmiley
Timber king 2000, 277c track loader, PJ 32 foot gooseneck, 1976 F700 state dump truck, JD 850 tractor.  2007 Chevy 3500HD dually, home built log splitter 18 horse 28 gpm with 5 inch cylinder and 32 inch split range with conveyor powered by a 12 volt tarp motor

thecfarm

Now I have spring fever!!!
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Thank You Sponsors!