Norwood Blades

[sawwood]

There is a set of blades for sale here in town but they are 13.5 long. our Norwood we have been
 using 144, those with Norwood mills do you think 13.5 will fit ?

 Sawwood

[armechanic]

  I wouldn't think they will work.   13.5 = 162  and you use 144.  I would bet that is too much difference.

[hamish]

Norwood uses two different bands dependant upon the mill 144" and 167".

So no they aint gonna work without be rewelded.

[Woodpecker52]

Order from cooks or woodmizer etc.  Never fool with other peoples blades.

[sawwood]

I bought the blades, there Wood-Mizer. they where 10 blades for $50 so could not go wrong. Will have to have Wood-Mizer resize them.

 Sawwood

[dgdrls]

I bought the blades, there Wood-Mizer. they where 10 blades for $50 so could not go wrong. Will have to have Wood-Mizer resize them.

Sawwood

You purchased bands that are the incorrect size?
D

[Stephen1]

I bought the blades, there Wood-Mizer. they where 10 blades for $50 so could not go wrong. Will have to have Wood-Mizer resize them.

Sawwood

And if thy can't you can always resell them. That was a good price 

[sawwood]

I picked up the Wood-Mizer blades to day and they are .055 X 1 1/4 X158, 7/39. These are new blades

 Do any of you Wood-Mizer guys run this type of blade? Not sure the 055 blades will work on our Norwood mill. I would have to have them cut down but would if they will work.

Sawwood

[Stephen1]

I run the .42-7/39 1.25. Great blades.There are quite a few sawyers running that blade you have. Put them up for sale here, or CL and then buy yourself some blades that fit your mill. 

[terrifictimbersllc]

I ran the blades you mention on my LT-40. Turbos, the 7/39 are called. Practically a universal blade. I use only this profile in 1-1/2 .055 on my LT70 so far.

[Stephen1]

I ran the blades you mention on my LT-40. Turbos, the 7/39 are called. Practically a universal blade. I use only this profile in 1-1/2 .055 on my LT70 so far.

TT do you run the .055 on your LT40?