iDRY Vacuum Kilns

Sponsors:

Coil stock for blades

Started by Mainecoast, October 11, 2021, 08:10:09 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Mainecoast

October 11, 2021, 08:10:09 PM
Well after asking what good a mill is when you can't get blades and parts. Someone mentioned buying a coil stock of my 2" blade I run. 

Can anyone point me in the direction of where I'd get my hands on a coil of 2" blade? I can make the weld jig and weld them up! 

Southside

#1
October 11, 2021, 08:33:30 PM
Can you anneal the weld too?  Faulty welds have led to plenty of premature band failures.  
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

Mainecoast

#2
October 11, 2021, 09:04:54 PM
I can.

Southside

#3
October 11, 2021, 09:18:07 PM
I would call Wood Mizer or any of the band suppliers and ask about buying a coil, you might have a side gig opportunity.  
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

chet

#4
October 11, 2021, 09:19:28 PM
I would give sponsor on the left, Menominee saw a shout. I've seen band stock there on up to well over a foot.  :)  They can help you if yer looking for double cut bands.
I am a true TREE HUGGER, if I didnt I would fall out!  chet the RETIRED arborist
Print
Go Up Pages1
User actions

Thank You Sponsors!